KTI-81798S 2 12/11/17
FAILURE TO OBSERVE THESE WARNINGS COULD RE SULT IN IN JU RY.
WARNING
THIS INSTRUCTION MANUAL CONTAINS IMPORTANT
SAFETY INFORMATION. READ THIS INSTRUCTION MANUAL
CAREFULLY AND UNDERSTAND ALL INFORMATION BEFORE
OPERATING THIS TOOL.
• Read and understand all instructions. Failure to follow
all instructions listed below, may result in electric shock,
fire, explosion and/or serious personal injury. It is the
responsibility of the owner to make sure all personnel read
this manual prior to using the tool. It is also the responsibility
of the tool owner to keep this manual intact and in a
convenient location for all to see and read. If the manual
or product labels are lost or not legible, contact K-Tool
International for replacements. If the operator is not fluent in
English, the product and safety instructions shall be read and
discussed with the operator in the operator's native language
by thepurchaser/owner or his designee, making sure that
the operator comprehends its contents.
• Always operate, inspect and maintain this tool in
accordance with American National Standards Institute
Safety Code of Portable Air Tools (ANSI B186.1) and any
other applicable safety codes and regulations.
• For safety, top performance and maximum durability of
parts, operate this tool at 90 psig; 6.2 bar max air
pressure with 1/2" diameter air supply hose.
•
Always wear impact-resistant eye protection
when operating or performing maintenance on this tool
(user & bystanders).
• Always wear hearing protection when using this tool.
High sound levels can cause permanent hearing loss.
Use hearing protection as recommended by your
employer or OSHA regulation (user & bystanders).
• Keep out of reach of children.
• Keep the tool in efficient operating condition.
•
Operators and maintenance personnel must be
physically able to handle the bulk, weight and power of
this tool.
• Air powered tools can vibrate in use. Vibration, repetitive
motions or uncomfortable positions over extended
periods of time may be harmful to your hands and arms.
Discontinue use of tool if discomfort, tingling feeling or
pain occurs. Seek medical advice before resuming use.
• Air under pressure can cause severe injury. Never direct
air at yourself or others. Always turn off the air supply,
drain hose of air pressure and detach tool from air supply
before installing, removing or adjusting any accessory
on this tool, or before performing any maintenance on
this tool. Failure to do so could result in injury. Whip
hoses can cause serious injury. Always check for
damaged, frayed or loose hoses and fittings, and replace
immediately. Do not use quick detach couplings at tool.
See instructions for correct set-up.
• Slipping, tripping and/or falling while operating air
tools can be a major cause of serious injury or
death. Be aware of excess hose left on the walking
or work surface.
• Keep body working stance balanced and firm. Do
not overreach when operating the tool.
• Place the tool on the work before starting the tool. Do
not point or indulge in any horseplay with this tool.
• Anticipate and be alert for sudden changes in motion
during start up and operation of any power tool.
• Do not carry tool by the hose. Protect the hose from
sharp objects and heat.
• Tool shaft may continue to rotate briefly after throttle is
released. Avoid direct contact with accessories during and
after use. Gloves will reduce the risk of cuts or burns
• Keep away from rotating end of tool. Do not wear jewelry
or loose clothing. Secure long hair. Scalping can occur
if hair is not kept away from tool and accessories. Choking
can occur if neckwear is not kept away from tool and
accessories.
• Use accessories recommended by K-Tool International.
• Use only impact wrench sockets and accessories on
this tool. Do not use hand sockets and accessories.
• Impact wrenches are not torque control devices. Fasteners
with specific torque requirements must be checked with
suitable torque measuring devices after installation with
an impact wrench.
• This tool is not insulated against electric shock.
• Note direction of rotation BEFORE operating this tool.
• Do not lubricate tools with flammable or volatile liquids
such as kerosene, diesel or jet fuel.
• This tool must not be used in explosive atmospheres.
• Servicing and repairs should only be made by an authorized
service center.
• Do not use (or modify) the tool for any other purpose
than that for which it was designed without consulting the
manufacturer's authorized representative.
• Do not force tool beyond its rated capacity.
• Do not remove any labels. Replace damaged labels.
• This product may contain one or more chemicals known
to the State of California to cause cancer and birth
defects or other reproductive harm.
Wash hands
thoroughly after handling.
• Failure to heed these warnings may result in serious
or fatal personal injury and/or property damage.
