manualshive.com logo in svg

K-Rain PRO EX 2.0, Инструкция по эксплуатации

Поделиться
Скачать
K-Rain PRO EX 2.0 Скачать руководство пользователя страница 6

6

|   www.krain.com

SET TIME / DATE

SET PROGRAM START TIMES

1.  Turn the dial to SET TIME / DATE, the LCD 

will display the time of day. The word  
“HOURS” will be flashing in the display.

NOTE:

 If the controller is connected to the

internet via WiFi Hub, the server will push
the correct time and date to the controller  
according to the controller address and
zip code entered during set up.

2.  Press the DOWN or UP buttons to set  

current hour.

3.  To change minutes, press the NEXT button.  

The word “MINUTES” will be flashing in  
the display.

4.  Press the DOWN or UP buttons to set  

current minutes.

5.  To set the current date, press the NEXT button. 

The word “DAY” will be flashing in the display.

6.  Press the DOWN or UP buttons to set  

current day.

7.  To set the current month press the NEXT  

button and the word “MONTH” will be  
flashing in the display.

8.  Press the DOWN or UP buttons to set the  

current month.

9.  To set the current year press the NEXT  

button. The word “YEAR” will be flashing  
in the display.

10. Press the DOWN or UP buttons to set the  

current year.

11. Return the dial to AUTO.

NOTE:

 The PRO EX 2.0 controller can be set for 

either 12 or 24 hour display. Pressing the BACK 
and NEXT buttons SIMULTANEOUSLY will allow user to 
toggle between 12 or 24 hour display.

The PRO EX 2.0 controller will allow up 
to four separate watering start times for 
each program.

1.  Use the PROGRAM select button to  

select the program (A, B or C) you wish 
to assign a start time.

2.  Turn the dial to SET PROGRAM START  

TIMES. The display will show the first start 
time currently set for the selected program.

3.  Press the DOWN or UP buttons to change  

the start time. The time setting change is 
in 15-minute increments.

4.  To eliminate a watering start time press  

the DOWN or UP buttons until “OFF”  
appears in the display. The OFF setting is 
located between 11:45 p.m. and 12:00 a.m.

5.  When additional start times are needed  

press the NEXT button to display the next  
watering start time. Repeat steps 4-6 for  
setting additional start times.

6.  Return the dial to AUTO. 

        

T I M E

9 : 1 0

AM

hours  minutes

        

f r i

  d a y       m o n t h     y e a r

2 8 f e b 1 8

A

PGM

1st 8:00

AM

start time 1

Содержание PRO EX 2.0





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды