manualshive.com logo in svg

K-Rain PRO EX 2.0, Инструкция по эксплуатации

Поделиться
Скачать
K-Rain PRO EX 2.0 Скачать руководство пользователя страница 36

The manufacturer guarantees to the original purchaser that any prod-
uct supplied by the manufacturer will be free from defects in material 
and workmanship for a period of two years from the date of purchase. 
Any product found to have defects in material or workmanship within 
the warranty period shall be repaired or replaced by the manufacturer.

The manufacturer does not guarantee the use for a particular purpose 
of its products and does not make any guarantee, expressed or 
implied, other than the warranty contained herein. The manufacturer 
shall not be liable for any loss from use of the product or incidental or 
consequential damages to other parts of any installation of which this 
product is part.

The warranty shall not apply to any equipment which is found to have 
been improperly installed, set up or used in any way not in accordance 
with the instructions supplied with this equipment, or to have been 
modified, repaired or altered in any way without the expressed consent 
of the manufacturer. This warranty shall not apply to any batteries or 
accessories used in the equipment covered under this warranty or to 
any damage which may be caused by such batteries. 

If the controller develops a fault, the product or main panel 
must be returned in adequate packing with:

1. a copy of your original invoice;

2. a description of any fault; and

3. contact name and information.

It is the purchasers responsibility to return the controller
to the manufacture or their agent by prepaid freight.

WARRANTY

                 Manufacturing Corporation
Modular Irrigation Sprinkler Controller

Hereby, K-Rain Manufacturing Corporation declares that this
irrigation controller PRO EX 2.0 is in compliance with the essential 
requirements and other provisions of Directive 1999/5/EC.

K-Rain Manufacturing Corp.

ATTN: WARRANTY
1640 Australian Avenue
Riviera Beach, FL 33404 
(561) 844-1002 

 

(561) 842-9493 FAX
(800) 735-7246 / www.krain.com

© K-Rain Manufacturing Corp.
AN ISO 9001 CERTIFIED COMPANY
26005201 Rev. 06

Certificate of Conformity to 
European Directives

IP 24 Certified

Содержание PRO EX 2.0





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды