Installation, Programming and Operation Manual
11
www.krain.com |
TEST ALL STATIONS
The PRO EX 2.0 allows the user a quick and
simple method for checking all available
stations by running a test program. This
feature operates each station individually
in numerical order starting with the lowest
available station.
Station operation is preset for a two minute
run time which the user can alter at anytime
during the test.
1. Turn the dial to SYSTEM TEST. The display
will show selected program and “SINGLE.” Press
the UP or DOWN buttons until
display shows “TEST.”
2. Press the MANUAL START button to begin
the test feature. The display will now show “RUN”
along with its remaining run time for
the first available station.
3. To change the default test time press
the UP or DOWN buttons. While the test
program is running the display shows the
station number currently operating, along
with its remaining run time. The controller
will run each station in numerical sequence.
4. Press the NEXT button to manually
advance to the next available station.
NOTE:
Changing the test run time can be done
at anytime and for any station during the test.
Any change to the test run time becomes the
new default for all stations.
test
