2
| www.krain.com
DECLARATION OF CONFORMITY
CONTENTS
This unit has been designed to provide reasonable
protection against harmful interference in a residential
install. This equipment uses, generates and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. There is no guarantee that
interference will not occur in any particular install.
If the equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and back on again, the user is encouraged to try to
correct the interference by: (1) reorient or relocate the receiving
antenna; (2) increase the separation between the equipment and
receiver; (3) connect the equipment into an outlet on a different
circuit from the receiver; (4) consult the dealer or an experienced
radio / TV technician for help.
Changes or modifications to this equipment could void the user’s
authority to use the equipment as well as the warranty.
INTRODUCTION
The PRO EX 2.0 WiFi Enabled Controller is available as indoor or
outdoor models, with both modules utilizing a WiFi enabled Hub.
The unit consists of a master valve/pump start, test, common,
sensor terminals and one factory installed module which will
operate four electric valves. The controller is expandable by
installing separately purchased four station modules which are
installed internally in the controller.
In addition, the WiFi enabled controller includes a separated WiFi
Hub (Photo), RF Module (Installed in Controller) and optional Long-
Range Antenna.
Controls and Touch Pad
03
Setting the Controller to Off
04
Set Controller to Run Automatically
04
Program Select Button
04
Rain Sensor Select Button
05
Programming 05
u
Set Time/Date
06
u
Set Program Start Times
06
u
Set Watering Days
07
u
Set Custom Operation
07
(any day of the week)
u
Set Odd/Even Operation
07
(calendar day)
u
Set Cyclic Watering Cycle
08
u
Set Station Run Times
08
Manual Program Operation
09
Remote/Pin 09
Running a Single Station Manually
10
Valve Locator
10
Test All Stations
11
Special Features
12
u
Seasonal Adjust
12
u
Station Delay/Overlap
12
u
Pump On/Off
12
u
Sensor
13
u
Open Circuit Detection
13
u
Clear
13
u
Save
14
u
Restore
14
u
Display Contrast
14
u
Permanent Day Off
15
u
Set Flow Meter
16
u
Set Optional Hi/Lo Flow Limits
17
u
Setting by Program
18
u
Setting by Zone
19
u
Flow History
20
u
Set Flow Units
21
u
See Live Flow Data
22
u
Possible Alarm Displays
23
Program Display
24
Resetting the Controller
24
Installation 25
u
Door Removal
25
u
Main Panel Removal
25
u
Mounting the Controller
26
u
Installing a 4 Station Module
27
u
Installing a 14 Station Module
27
u
Module Layout Combinations
28
u
Installing a 14 Station Module
29
u
Connecting Valve Wires
29
u
Connecting the Flow Sensor
29
u
Pump Start/Master Valve Wiring
30
u
Rain Sensor Installation
30
Remote Programming
31
Powering the Controller
31
Specifications 32
u
Operating Specifications
32
u
Electrical Specifications
32
u
Dimensions
32
Troubleshooting 33
Quick Programming Reference Guide
34
Spare Watering Planner
35
Warranty 36
*To connect Controller and WiFi hub to the internet please see
accompanying Quick Start Guide for complete instructions.
