manualshive.com logo in svg

K-Rain PRO EX 2.0, Инструкция по эксплуатации

Поделиться
Скачать
K-Rain PRO EX 2.0 Скачать руководство пользователя страница 14

14

|   www.krain.com

SAVE

RESTORE

DISPLAY CONTRAST

The SAVE feature allows the user to save 
all current programming. This allows the user
to quickly and easily restore any saved 
program(s) should they be changed.

1.  Turn the dial to SPECIAL FEATURES. Display  

will show “SEASONAL ADJUST % 100.”

2.  Press the NEXT button until “SAVE” is  

displayed. 

3.  To enter the SAVE feature press the  

UP or DOWN button and the display  
should now show “SAVE*.”

4.  Press the NEXT button to save the current  

program(s). The display will briefly show      
“SAVED” before automatically advancing 
to the next available feature. 

5.  Return the dial to AUTO.

The “RESTORE” feature allows the user  

to restore any previously saved programs. 

1.  Turn the dial to SPECIAL FEATURES. Display  

will show “SEASONAL ADJUST % 100.”

2.  Press  the NEXT button until “RESTORE” 

is displayed. 

3.  To enter the RESTORE feature press the  

UP or DOWN button and the display  
should now show “RESTORE.”

4.  Press the NEXT button to restore any  

previously SAVED  program(s). Display 
will briefly show “RESTORE” before  
automatically advancing to the next 
available feature. 

5.  Return the dial to AUTO.

The “CONTRAST” feature allows the 
user to adjust the display for best viewing.

1.  Turn the dial to SPECIAL FEATURES.  

The display will show “SEASONAL 
ADJUST % 100.”

2.  Press  the NEXT button until  

“CONTR 0” is displayed. 

3.  Press the UP or DOWN  buttons  

to increase (+9) or decrease (-9)  
display contrast. 

4.  Return the dial to AUTO.

SPECIAL FEATURES

save

restore

contro o

                         adj.

Содержание PRO EX 2.0





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды