K-Line CROP CADET SG60T, Инструкция по эксплуатации и безопасности

Страница: 7 / 48

7
SG60 SEEDER CROP CADET OPERATOR & SAFETY MANUAL
Figure 2
When you receive the machine, make sure that it has not been damaged during transportation and that no
parts are missing. Only by giving us immediate advice can the necessary replacement parts be obtained.
Ensure that all components are correctly adjusted.
GENUINE PARTS
K-Line spare parts and accessories have been specifically designed and developed for the machines
produced. We would call your attention to the fact that non-genuine parts and accessories are not
recommended by K-Line. The use of such replacement parts frees K-Line from all liability and makes the
warranty void. The installation and/or use of non-genuine parts may, because of technical characteristics
of construction, modify or influence the performance of the machine negatively.
IDENTIFYING THE MACHINE FOR REQUESTING SPARE PARTS
The machine is identified by the serial number on the metal plate on the machine. When requesting
spare parts or maintenance service, please indicate the model and number of your equipment to ensure
prompt and efficient attention.
TRACTOR REQUIREMENTS
6-8 Horsepower x no. of tines in machine
4.5 - 6 Kilowatts x no. of tines on machine
Tractor weight must be same as or greater than the towed unit.
Hydraulic valves 2 x double spool (plus qty required for seed bin)
Hydraulic operating pressure 2800 PSI approximately
DEFINITIONS USED IN THIS MANUAL
AFTER DELIVERY