manualshive.com logo in svg

K-Line CROP CADET SG60T, Инструкция по эксплуатации и безопасности

Поделиться
Скачать
K-Line CROP CADET SG60T Скачать руководство пользователя страница 11

11

SG60 SEEDER CROP CADET                                              OPERATOR & SAFETY MANUAL

WARNING!!!

SAFETY PRECAUTIONS

FAILURE TO OBSERVE THE FOLLOWING 

INSTRUCTIONS COULD RESULT IN SERIOUS 

INJURY OR DEATH

It is the responsibility of the purchaser to:

•  Maintain in as new condition all warning and safety signs and devices at all time.

•  Consult electricity authorities and all relevent energy companies to determine safe 

working                

distances from overhead power lines etc BEFORE operation of the machine. 

POWER LINES CAN 

ARC AND ELECTROCUTE WITHOUT COMING IN CONTACT!!!

•  Ensure all operators are familiar with this manual and all safety devices and features of the machine.

•  Take every reasonable precaution as is commonly expected in this industry and in the operation of 

the machine.

•  Maintain the machine at all times in a condition that is safe to operate, and ensure strength and 

balance of machine is adequate to accommodate the K-Line products you have purchased.

•  Conduct a risk assessment, taking all risks into consideration before comissioning machine for 

use.

Содержание CROP CADET SG60T

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды