K-Line CROP CADET SG60T, Инструкция по эксплуатации и безопасности

Страница: 26 / 48

SG60 SEEDER CROP CADET OPERATOR & SAFETY MANUAL
26
IT IS THE RESPONSIBILITY OF THE OPERATORS TO:
• READ AND UNDERSTAND YOUR MANUAL.
• TAKE TIME TO FAMILIARIZE YOURSELF WITH THE OPERATION OF
THIS MACHINE, PARTICULARLY THE SAFETY SIGNS AND DEVICES
FITTED TO THIS MACHINE.
USE OF MACHINE BEYOND ITS LIMITS OR INTENT OF OPERATION
WILL VOID WARRANTY.
Slow down in terrain such as rocks or other difficult operating conditions.
SAFE OPERATION IN FIELD & TRANSPORT/ROADING
1. Wheel rams must be fully extended with travel-stop holders on centre wheel rams for transport.
2. Ensure towing unit weight is the same as or greater than the towed unit.
3. Lockout tractor drawbar swing mechanism.
4. Ensure tyres are correctly inflated.
Pg 21.
5. Check wheel nut tension *NB -
Pg 21 for wheel nut re-tensioning times 4 sequence.
6. Ensure all safety locks are engaged.
7. Ensure safety chains are attached to towing unit.
8. Tractor drawbar must be in fixed position, not swinging.
9. Ensure tractor brakes are latched together at all times.
10. Plan your route to avoid heavy traffic.
11. Observe bridge load ratings.
TIP OVER HAZARD this is an unbraked implement. Use extreme caution when turning, and on steep
terrain.
Maximum towing speed is 20mph (32km/hr). DO NOT EXCEED AT ANY TIME.
NEVER transport machine on public roads without complying with Federal and State laws and local
regulations governing the safe movement of farm machinery.
Figure 22
TRANSPORTING/ROADING
Figure 22
Figure 23
S A F E T Y