manualshive.com logo in svg

K-Line CROP CADET SG60T, Инструкция по эксплуатации и безопасности

Поделиться
Скачать
K-Line CROP CADET SG60T Скачать руководство пользователя страница 20

SG60 SEEDER CROP CADET      OPERATOR & SAFETY MANUAL

20

INSTRUCTIONS FOR SAFE OPERATION

The machine should not be driven, maintained or repaired by people who are not aware of the contents 

of this user manual.

This User’s Manual should be read and understood by all those who use, adjust or control the machine. 

These safety instructions should be passed onto other users.

1. 

BE SURE 

tractor drawbar pin is locked securely in place.

2. Make  

SURE 

all personnel are clear of machine when folding/unfolding & when in operation.

3. 

DO NOT

 operate unit while people are within 20 metres.

4. 

KEEP CLEAR

 of machine when in working & lifted position - 

AT ALL TIMES.

5. Hydraulic lines & hoses operate under extremely high pressure & if damaged or worn 

MUST 

be repaired

 

IMMEDIATELY.

6. Keep 

HANDS & BODY CLEAR 

of any oil leakage as high pressure oil can penetrate the skin.

7. All bolts, nuts & pins MUST be well secured.

8. 

DO NOT

 stand on or ride on machine.

9. 

NEVER

 get under or on top of machine when it is supported by jack and 

KEEP TO LEFT OF MACHINE 

& KEEP BODY CLEAR 

when operating jack.

10. 

NEVER

 alter the depth control or change to or from transport position, while another person adjusts 

safety pins.

11. This machine has not been designed or built for road use. Please consult State Police, Roads & Traffic 

Authority and any other relevant authorities regarding the roads concerned when in transit.

12.

 DO NOT

 operate if any part of this machine is within 10 metres of overhead power lines.

13.

 SPEED LIMIT 

- Subject to permit regulations, local government Authorities, road surface conditions & 

prime mover towing recommendations. Maximum towing speed is 32km/hr. 

DO NOT EXCEED AT ANY 

TIME.

14.

 TYRE PRESSURE

 - Consult recommended tyre pressure table.

15. Before operation, all hydraulic cylinders must be primed.

I

IMPORTANT

MPORTANT

K-LINE AG Spare parts and accessories have been specifically designed and developed for the machines 
produced. We call your attention to the fact that non genuine parts and accessories are not recommended 
by K-LINE AG. The use of such replacement parts frees K-LINE AG from all liability and makes the warranty 
void. The installation and/or use of non genuine parts may, because of the technical characteristics of 
construction, modify or influence the performance of the machine negatively.

REMEMBER AN IMPLEMENT WITH NO BRAKES REQUIRES 

CAUTION & COMPETENCE

Содержание CROP CADET SG60T

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды