User information
Angled mincer WW 130/160
WWD130
10.06.2022
Speicherdatum 10.06.2022 11:53:00
Seite 2
0 Safety instructions
◆
Familiarity with the safety information and regulations is a
prerequisite for the safe and malfunction-free operation of the
meat mincer. The user information must be passed on if the
machine is resold.
◆
This user information and the “Meat processing machines
accident prevention reg.s” (VBG 19) contain important
instructions for safe installation and operation of the cutting
mixer. Furthermore the locally applicable rules and regulations
for accident prevention and hygiene should be observed.
◆
Everyone involved in the installation, starting up and
maintenance of the machine must carefully read and observe the
following user information. If someone is not in the position to
read and understand this information, then all instructions and
safety measures must be thoroughly explained to this person. It's
a question of your own safety!
Keep juniors, children and unauthorised persons away from
the machine!
◆
The operator is obliged to allow only those persons to operate
the machine who:
−
- are instructed in the operation of the machine and who are
familiar with the basic regulations concerning safety at work
and accident prevention.
- have read and understood this user information, especially the
chapter on safety.
◆
As stated in “
Meat processing machines accident prevention
reg.s” (VBG 19) § 59, the operator should produce operating
instructions in accordance with the user information. It is
recommended to keep written verification of the compliance with
the instructions in the user information and the operating
instructions.
Check the meat mincer for damage!
◆
Before using the meat mincer, all safety equipment and moving
parts must be checked carefully for flawless functioning as
intended. All parts must be mounted properly as intended to
guaranty flawless functioning of the meat mincer.
◆
The supervisor must immediately have dysfunctional safety
devices replaced or repaired and issue operating instructions to
ensure safe operation until their completion.
◆
Defective safety devices, switches, cables or other parts must,
in so far as not otherwise specified in the user information, be
replaced by K+G Wetter customer service or another authorised
customer service.
Intended use
