User information
Angled mincer WW 130/160
WWD130
10.06.2022
Speicherdatum 10.06.2022 11:53:00
Seite 3
◆
The meat mincer is intended exclusively for the purposes
specified in chapter 2.10 (Area of Application). Any use differing
from or exceeding that specified is considered not to comply with
the intended use.
◆
The meat mincer may only be operated with discharge guard and
protective grating or protective funnel. It is prohibited to reach
behind the discharge guard while the machine is running.
◆
The locking ring may not be removed until the worm has come to
a stop and the main switch has been switched off and secured.
◆
The use of accessories supplied or recommended by the
manufacturer and observance of inspection and maintenance
intervals is also part of proper use.
Take good care of your meat mincer!
◆
Observe the cleaning and maintenance information and the
instructions for cutter assembly changing. Only sharp, clean tools
work cleanly and safely!
◆
Always keep handles and controls dry, clean and grease-free.
Turning off the main switch!
◆
Turn off the main switch when the cutting mixer is not required,
before cleaning and maintenance and when changing the cutter
head. Only the switches only the control panel may be used for
switching on and off during normal operation.
Check cables!
◆
Protect power cable from heat and sharp edges and check it
regularly. If the cable is damaged, have it replaced by customer
service or a qualified electrician.
Wear suitable working clothes!
◆
Do not wear loose clothing or jewellery. Loose clothing could
become trapped and drawn in. Wear cap or hair net and slip-free
footwear.
