User information
Angled mincer WW 130/160
WWD130
10.06.2022
Speicherdatum 10.06.2022 11:53:00
Seite 17
Star-shaped handle
Regulating slide gate
Channel
Stop bolt with cap nut
Open
Close
Stop bolt with cap nut
Worm housing
Sorting knife
Fig. 4 Sorting device
The construction of the sorting cutter assembly (Fig. 2) corresponds
to a double cutter assembly, only the knife in front of the finely
perforated plate (Fig. 2, Pos. 2) is replaced by a special sorting
knife (Fig. 2, Pos. 11). A plate with 8 or 13 mm bores should be
used as the first perforated plate. The discharge channels of the
sorting knife are designed for this diameter.
Construction of the sorting cutter assembly:
- for 2 and 3 mm grain
- Precutter
- Knife
- Perforated plate 8 or 13 mm
- Sorting knife
- Perforated plate 2 or 3 mm
It is recommended not to use the sorting device with a grain greater
than 3 mm. Larger grains are not possible with a standard
perforated plate. The sorting level is continually adjustable
according to the opening width of the regulating slide gate (Fig. 4),
which can be clamped in place by turning the star-shaped handle.
4.5.4 Worm ejector
Activating the worm ejector (Fig. 1, Pos. 11) separates the working
worm and the cutter assembly from the drive and pushes them
forward for removal (after the locking ring has been removed).
