22
Alarm
Alarm 1
11. Alarm Setup
This chapter describes how to set up the operations to be executed upon receiving an alarm signal.
(To use this function, it is required to set up the alarm on the device connected to the desired view point in ad-
vance. For details, refer to the instruction manual for the connected device.)
11-1. Alarm Setting Procedure
1
Click on the Live View Window to set up the alarm to make the window active.
2
Open the [Setting] menu and select [View Window] to open the ‘Live View Window Setting’ dialog box.
3
Click on [Alarm] tab.
4
Click on the button of the [Target View Point] box to open
the drop-down list and select the view point where the
alarm operation is required.
* If [Disabled] is checked, the operation upon alarm
reception will not be executed.
5
Under the [Alarm 1], [Alarm 2], [Alarm 3/Motion Detect]
and [Alarm 4/Relay Alarm] tabs, select the operations to
be executed upon reception of each alarm signal.
Check the boxes of the required operations.
(For the detailed operation setting, see the next section
11-2, "Setting the Operation Upon Alarm Reception.")
