manualshive.com logo in svg

JVC SW-D8000U, Инструкция по эксплуатации, Страница: 73 / 87

Поделиться
Скачать
JVC SW-D8000U Скачать руководство пользователя страница 73

SW-D8000U,   16CH. COLOR VIDEO MULTIPLEXER 

  

                   JVC PROFESSIONAL, IMAGING PRODUCTS                      73   

 

2 

DC +12V 

3 

Nve 

4 (NC) 

- 

5 (NC) 

- 

6 

Network -ve 

7 

GND 

8 

DC +12V 

 

For networks longer than 30 feet, you must terminate the network at each end for it to work reliably.  
The network is polarity dependent, so you must connect pin 3 to pin 3 and pin 4 to pin 4. Do not 
reverse the polarity of the network. 
 
Do NOT use the DC 12V power leads in the RS-485 cable UNLESS it is to be used on a one-to-one 
connection between a unit with DC 12V power and a unit with no DC 12V power. For example, from 
a multiplexer directly to a keyboard that does not have its own power source.  
 
In all other circumstances, such as multi-dropped multiplexers, do NOT use the DC 12V power 
leads in the RS-485 cable. 
 
If you choose to power another unit (e.g. a single keyboard), you can do this up to 30 feet from the 
multiplexer. Use a 4-core shielded cable, equivalent to Belden 8723.  

 

For more detail on the remote keyboard, refer to the

 

JVC-KB Remote Keyboard

 instruction sheet. 

 
4.16  FRONT PANEL LOCK 

 

This option is used to lock and unlock the front panel keyboard of the multiplexer. You get the 
following menu: 
 

Unlock Keyboard

 

Lock Keyboard

 

 
Once LOCK KEYBOARD is selected, the multiplexer can only be operated again through the input 
of the proper password.   The only key which will operate is the MENU key. 

 
4.17   FACTORY SETTINGS    

 
This option is used to reset the multiplexer to factory settings.  The password for this setting is only 
available for factory authorized service personnel.  Contact Customer Support for further 
information. 
 
 

4.18   PASSWORDS 

 
This option is used  to change the passwords for the menu system. You get the 
following menu: 

 

Installer Password 

Содержание SW-D8000U
























































































Отзывы:

Нет отзывов