manualshive.com logo in svg

JVC SW-D8000U, Инструкция по эксплуатации, Страница: 22 / 87

Поделиться
Скачать
JVC SW-D8000U Скачать руководство пользователя страница 22

SW-D8000U,   16CH. COLOR VIDEO MULTIPLEXER 

 

  22                   JVC PROFESSIONAL, IMAGING PRODUCTS                             

 

Each recorded field is uniquely identified and linked to its input camera source by coded digital data 
that is automatically inserted into the time-sliced video field.  Time/date and camera status 
information is also included in the coded data within each field.  This coded data is used to provide 
comprehensive status and camera identification information during later Playback of recorded 
signals. 
 
Record mode is always active.  It is not necessary to press the 

RECORD

 key. 

 

3.2.1 

MONITOR OUTPUTS IN RECORD MODE   

 

 

Monitor-A Output while recording:  

The operator can select either the Live or Play mode while recording is taking place.  The 
operator can select any desired Monitor-A multi-screen function as previously described in 
Section 3.0.   In Play mode, images on Monitor-A are from the VCR tape recording when the 
VCR is in Play mode.  If the VCR is not in Play mode, then the images on Monitor-A are from 
the VCR output of the 

SW-D8000U

, not recorded images.   

 
Record Speed Indicator on Monitor-A:  

During recording, the

 SW-D8000U 

indicates the speed at which it is recording on Monitor-A.  It 

uses the same time-format for the indicator as is generally used by time lapse VCRs.  For 
example, 

R024

 

will be displayed to indicate that the unit is 

R

ecording in 

24

 

hour mode.  (If the 

VCR VEXT input is active, then 

R EXT

 will be displayed.)  

 
Monitor-B Output while recording:  

Monitor-B always displays analog Live, full-screen images of the camera inputs, regardless of 
which mode is selected.  
 

3.2.2  

ALARM DISPLAYS IN RECORD MODE    

 
Alarm displays will conform to the Live or Play modes of operation.  See Section 3.4 for further 
details on alarms. 

 

3.3 

PLAYBACK 

 

Play Mode: 

To enter Play mode, press the 

PLAY

 key.

  

 
Play mode will initially always stop any Live mode multi-screen displays on Monitor-A.  Monitor-B 
always displays full-screen Live displays and hence will not be affected if Play mode is selected. 
 
The

 SW-D8000U 

video multiplexer can display video Played back from a VCR whether it was 

originally recorded from a multiplexer, or whether it was recorded from normal video input, (i.e. not 
multiplexed). 

 

The

 SW-D8000U 

can also correctly interpret tapes encoded on Dedicated Micros, Robot or Calibur 

multiplexers, by changing an operator selectable option in the OPERATOR sub-menu PLAYBACK 
FORMAT. This is useful in installations that already have other multiplexers.   

 

3.3.1 

PLAY MODE: MONITOR-A DISPLAYS 

 

Monitor-A Multi-screen display formats: 

When Playback is first started, the unit will select a 16-way multi-screen display on Monitor-A, 
which shows all cameras that were recorded on that tape.   
 

To select a different multi-screen:  

Содержание SW-D8000U
























































































Отзывы:

Нет отзывов