JVC SW-D8000U Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 87

JVC SW-D8000U Скачать руководство пользователя страница 52

SW-D8000U, 16CH. COLOR VIDEO MULTIPLEXER

52 JVC PROFESSIONAL, IMAGING PRODUCTS

faster update to tape of a camera in alarm. This is a system wide (

global

) setting, and is not set up

individually for each alarm input.

Normal:

NORMAL recording during alarms means that there is no priority recording for the cameras in
alarm, and the record list will be unchanged while alarms are active. However, the programmer can
still program the VCR and the unit to switch from a time lapse speed to a faster recording speed
during alarms, which by itself can ensure that alarm events have a faster update speed.

Exclusive:

EXCLUSIVE recording will cause the system to record only alarmed cameras. All non-alarmed
cameras are omitted from the record list while an alarm is active. EXCLUSIVE recording mode is
typically chosen only when several simultaneous alarms can be expected to occur very often, and
where a near real-time record of those alarm events are needed. The disadvantage of choosing
this mode is that other cameras will not be recorded at all while any alarm is active.

If EXCLUSIVE alarm recording is selected, then the alarm-input sensors used need to be:

q

very comprehensive, so that alarm events are not missed, and

q

reliable, so that the system does not start exclusive alarm mode recordings for false alarms.

NOTE:

If only one camera is in alarm and the alarm speed is set to the 2 hour mode, then the
unit will automatically select INTERLEAVED recording even though

EXCLUSIVE mode

is selected.

Interleaved:

During INTERLEAVED

recording both the alarmed cameras and non-alarmed cameras are

recorded, but alarmed cameras, having a higher priority, are interleaved between non-alarmed
cameras. INTERLEAVED mode offers increased recording of cameras in alarm, without stopping
the recording of other cameras. This is the mode recommended for most installations.

Example:

Non-alarmed cameras: 1,2,3,5,7
Cameras in alarm:

4,6

INTERLEAVED recording sequence:
1,4,6,2,4,6,3,4,6,5,4,6,7,4,6,1, ....etc.

NOTE:

Because of the fast update rate of the SW-D8000U, if one camera is in alarm then
INTERLEAVED

mode will result in real-time Playback of the camera in alarm. In

general, on the SW-D8000U, INTERLEAVED

recording will give very fast update

speeds of cameras in alarm even for multiple alarms.

INTERLEAVED

mode is the

recommended setting.

ENABLE / DISABLE

Any alarm input can be set up as being active (enabled) or inactive (disabled). In this option you
may select:

q

INDVIDUAL ENABLE

q

ENABLE ALL

q

DISABLE ALL

ALARM HISTORY

«
...
50
51
52
53
54
...
»

Содержание SW-D8000U
























































































Отзывы:

Нет отзывов