manualshive.com logo in svg

JVC SW-D8000U, Инструкция по эксплуатации, Страница: 29 / 87

Поделиться
Скачать
JVC SW-D8000U Скачать руководство пользователя страница 29

SW-D8000U,   16CH. COLOR VIDEO MULTIPLEXER 

  

                   JVC PROFESSIONAL, IMAGING PRODUCTS                      29   

 

3.6.3 

ZOOM 

 
The

 SW-D8000U 

provides a digital 2X 

ZOOM

 

on full-screen displays on Monitor-A, during Live 

or Play modes.  

ZOOM

 

is not available on Monitor-B. 

 

To ZOOM an image: 

First select a full-screen display on Monitor-A and then press the 

ZOOM

 

key.  If 

desired, the image can be frozen before it is zoomed. Zoom operates on either a 
frozen or a non-frozen display.  A zoomed signal can be frozen.  
 

Electronic Pan & Tilt

:  

On all zoomed displays on Monitor-A use the arrow keys to pan and tilt to different 
sections of the zoomed image.  
 

Indicator:  

There is an on-screen 

ZOOM

 indication when ZOOM mode is in effect, and the LED in the 

ZOOM

 

key is lit. 

 

NOTE

:   The ZOOM key must be pressed again to unZOOM the display. 

 

3.6.4 

SELECTING VCR AS AN INPUT  (VCR VIEW) 

 
The operator may need to view the video output of the VCR.  Typically this is to check VCR 
output or settings. 

 
To select the VCR as an input:

  

Press 

FUNCTION

 

and then press 

PLAY

 

 

To de-select the VCR as an input:

  

Repeat the above procedure.   
 

NOTE:

  When VCR VIEW is exited, the unit always reverts to Live mode. 

 

3.6.5 

SUMMER / WINTER TIME CHANGE 

 
Setting the time requires the operator to know the menu password.  In some installations 
personnel  with access to the menus are not available to reset the unit’s clock during time 
changes for summer and winter.  The

 SW-D8000U

 provide a shortcut to set time forward by an 

hour in Spring and back by an hour in the Fall, using the following Function key sequence. 
 
To adjust the clock by an hour for Summer/Winter time changes press 

FUNCTION

 and then press the 

SEQUENCE

 key.  

 
In April, this will cause the time to adjust forward by one hour. 
In October, this will cause the time to adjust back by one hour. 
 

This function can only be used once in each period.   For example, if 

FUNCTION

 + 

SEQUENCE

 is pressed during  April it will add an hour to the time, but if 

FUNCTION

 + 

SEQUENCE

 is pressed again then it will be ignored until October. 

 

NOTE:

 

If the Master/Slave selection is used to set up one multiplexer in an installation as a 
master clock, the Summer/Winter time change can be done on just the Master 
unit.  The master clock will control the time and date display for the other 

Содержание SW-D8000U
























































































Отзывы:

Нет отзывов