manualshive.com logo in svg

JVC SW-D8000U, Инструкция по эксплуатации, Страница: 27 / 87

Поделиться
Скачать
JVC SW-D8000U Скачать руководство пользователя страница 27

SW-D8000U,   16CH. COLOR VIDEO MULTIPLEXER 

  

                   JVC PROFESSIONAL, IMAGING PRODUCTS                      27   

 

The LED and internal buzzer alarm indicators will be activated only if a

 

Live

 

alarm is active.  

Alarm status Played back from a recorded tape has no effect on these indicators.  The internal 
buzzer can be disabled via an installer programmed menu item. 
 

3.4.4 

ALARM INDICATORS 

 
On-screen display of text

 

"

A

" in each corresponding cameo of multi-screen displays and 

 ‘ALM’ 

on any Monitor-B displays relating to cameras in alarm. The indications will be flashing.    
 
An additional indication in the form of an LED is provided on the front panel, above the 

ALARM

 

key.  This LED will flash if any Live alarm is active and has not been cleared.  An internal will 
sound while any Live alarm is active.  This buzzer can be disabled via a setup menu. 
 

3.4.5 

CLEARING ALARMS 

 
To clear all displayed alarms: Press the 

ALARM

 key.  

 

3.4.6 

ALARM HISTORY 

 
An alarm history is kept in a cyclic buffer.  History data, including camera number and time and 
date is kept in memory for up to 100 events.  The most recent 100 alarm events can be viewed 
on-screen in the menus, by selecting the 

OPERATOR

 menu and then selecting 

ALARM 

HISTORY

. 

 
A table will appear, allowing the user to browse forward and backwards among the last 100 
alarmed events.  Each event relates the time of occurrence with an alarm-input number. 

 
 

3.5 

MOTION DETECTION 

 

The 

SW-D8000U

 offers motion detection capabilities, including built-in Activity Detection. Activity 

detection is used to adjust the rate at which cameras are recorded and can activate an output relay 
to cause automatic external actions such as speed change  on the VCR, or floodlights, or audio 
announcements and so on. 

 

3.5.1 

ACTIVITY DETECTION  

  

Activity detection simply looks for changes in the luminance in various selected areas of the 
screen, and if changes are above a set threshold (sensitivity) then the activity detector interprets 
that to be activity.  Typically, activity detection is used to detect activity in crowded areas, where 
activity is not the result of intruders and where human traffic is normal and expected. 

 

If activity is detected the 

SW-D8000U 

will automatically change recording speed according to its 

programmed settings.  If a relay has been programmed to be activated, then it will respond as 
programmed until the activity ceases. 
 

Indicators

:  If enabled in programming, the indicator ‘

M

’ will appear in each camera scene 

whenever activity motion has been detected.   The indicator is not present on full-screen analog 
displays. This motion indicator will stay on each active camera’s display for at least 2 seconds 
after the motion has ceased.  
 
If alarm input is activated by one of the 

SW-D8000U 

internal motion detector channels, the unit 

will react in exactly the same way as for any other external sensor activating that alarm input.  

Содержание SW-D8000U
























































































Отзывы:

Нет отзывов