JVC RX-F31S Скачать руководство пользователя страница 92

Страница: 92 / 153

On the front panel:

Before you start, remember...

There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step

again.

Select and play any source other than “DVD
MULTI.”

• Make sure you have selected the input mode (analog or

digital) correctly.

Press SURROUND.

MULTI JOG now works for selecting Surround/DSP modes.

Turn MULTI JOG to select the Surround/DSP
mode you want.

Ex.: When “DOLBY D” is selected for Dolby Digital multi-

channel software:

To cancel Surround/DSP modes

Turn MULTI JOG so that “SURR OFF” appears on the display.

NOTE

The initial setting is “AUTO SURR.”

* Available Surround modes vary depending on the incoming

signals. For details, see “Using the Surround/DSP modes” on
page 38.

When you select “AUTO SURR” (Auto Surround)

You can enjoy the Surround mode easily.
• For details about the Surround modes, see pages 34 to 36.
• When “AUTO SURR” is activated, the AUTO SR indicator lights

up on the display.

How does “AUTO SURR” work?

• If a multi-channel signal comes in, an appropriate Surround

mode will be selected automatically.

• If a Dolby Digital 2-channel or DTS 2-channel signal with

surround signal comes in, “PLII MOVIE” will be selected.

• If a Dolby Digital 2-channel or DTS 2-channel signal without

surround signal, or a Linear PCM signal comes in, “SURR
OFF (stereo)” will be selected.

NOTES

• “AUTO SURR” does not take effect in the following cases:

– While playing an analog source.
– While selecting one of the fixed digital decode modes—

“DOLBY D” or “DTS” (see page 13).

• While listening with the headphones, the 3D HEADPHONE

mode (see pages 36 and 37) is activated without respect to the
type of software played back.

• When “AUTO SURR” is selected, sound may not come out at

the beginning of playback. If it occurs, select a Surround mode
manually.

Activating the Surround/DSP modes

Available Surround/DSP modes vary depending on the incoming
signals. For details, see page 38.

Activating one of the Surround/DSP modes automatically
recalls the memorized settings and adjustments.

• To adjust the speaker output level,

see page 29.

• To adjust the effect level for the DSP mode (except All

Channel Stereo mode,)

see page 31.

• To add “wraparound” sound effect to “PLII MUSIC”

(PANORAMA control,)

see page 31.

• To adjust the sound localization of the center channel

for “NEO:6 MUSIC” (center gain,)

see page 31.

• To adjust the vertical localization of the center channel

for Surround/DSP modes (except “PLII MUSIC,” “PLIIx
MUSIC,” “Neo6: MUSIC,” and “ALL CH ST”) (center
alignment,)

see page 31.

NOTES

• You cannot use any Surround/DSP modes when selecting “DVD

MULTI” as the playback source.

• The on-screen display appears on the TV screen to show the

Surround/DSP mode name for 5 seconds when you select the
Surround/DSP mode.
To cancel the function, set “SUPERIMPOSE” to
“SUPERIMPOSE: OFF” (see page 25).

From the remote control:

Select and play any source other than “DVD
MULTI.”

• Make sure you have selected the input mode (analog or

digital) correctly.

Press SURROUND repeatedly to select the
Surround/DSP mode you want.

Ex.: When “DOLBY D” is selected for Dolby Digital multi-

channel software:

To cancel Surround/DSP modes

Press SURROUND repeatedly so that “SURR OFF” appears on
the display.

1, 3

EQ
LPCM

S . WFR