7
This receiver is equipped with the following video terminals—
composite video, S-video, and component video terminals.
• If your video components have S-video (Y/C-separation) and/or
component video (Y, P
B
, P
R
) jacks, connect them using an S-
video cable (not supplied) or component video cable (not
supplied). By using these terminals, you can get a better picture
quality in the order:
Component > S-video > Composite
IMPORTANT:
Component video signals are transmitted only through component
video output jacks. Therefore, if a recording video component and
a playing video component are connected to the receiver through
the video terminals of different type, you cannot record the picture.
In addition, if the TV and a playing video component are
connected to the receiver through the video terminals of different
type, you cannot view the playback picture on the TV.
On the other hand, S-video signals and composite video signals
can be converted into each other and transmitted through the
corresponding output jack. For details about the settings of the
conversion, see page 25.
110V
127V
220V
230 -
240V
VIDEO
VCR
OUT
(REC)
VCR
OUT
(REC)
DVR
OUT (REC)
DVR/DVD
IN (PLAY)
AUDIO
Y
P
B
P
R
MONITOR
OUT
DVR/DVD
IN
VCR
IN
COMPONENT
DVR/DVD
IN (PLAY)
DVR
OUT (REC)
S-VIDEO
Å
ı
Î
‰ Ï
Ì
Ç
Turn off all components before making connections.
• When you connect other components, refer also to their
manuals.
DO NOT use a TV through a VCR or a TV with a built-in
VCR; otherwise, the picture may be distorted.
CAUTION:
If you connect a sound-enhancing device such as a graphic
equalizer between the source components and this receiver, the
sound output through this receiver may be distorted.
If your video components have AV COMPU LINK terminal
See also page 40 for detailed information about the connection
and the AV COMPU LINK remote control system.
Å
To left/right audio channel output
ı
Only for DVD recorder:
To left/right audio channel
input
Ç
Only for DVD recorder:
To composite video input
Î
To composite video output
‰
To S-video output
Ï
Only for DVD recorder:
To S-video input
Ì
To component video output
• Connect Y, P
B
, and P
R
correctly.
White
Red
DVD recorder or
DVD player
White
Stereo audio cable
(not supplied)
Green
Blue
Red
Component video cable (not supplied)
S-video cable (not supplied)
Composite video cable
(not supplied)
7
Connecting a DVD recorder or DVD player with its stereo output jacks (DVR/DVD):
Connecting video components
Do not connect the AC power plug to the wall outlet until all connections are completed.
NOTES
• When connecting a DVD recorder or DVD player to the
component video input jacks, make the component video input
setting (DVD VIDEO INPUT) correctly. If you do not, you cannot
view the playback picture on the TV or the AV COMPU LINK
remote control system cannot operate properly. For details, see
page 25.
• You can enjoy digital sound if using a digital coaxial or optical
cable. When shipped from the factory, the audio input mode for
a DVD recorder and DVD player is set to use the digital coaxial
terminal (DIGITAL IN 1 (DVR/DVD)). For details of digital
connection, see page 11.
Red
EN06-11RXF31S[UJ]ff.p65
05.6.9, 18:11
7
