24
English
Setting the digital input (DIGITAL IN)
terminals—DIGITAL IN 1/2/3
When you use the digital input terminals, register what
components are connected to which terminals—DIGITAL IN 1/2/3
(see page 11) so that the correct source name will appear when
you select the digital source.
Select one of the following components for each terminal:
DVR/DVD
For the DVD player (or DVD recorder).
DBS
For the DBS tuner.
VCR
For the VCR.
TV
For the TV.
Initial setting:
DVR/DVD (for “DIGITAL IN 1”)
DBS (for “DIGITAL IN 2”)
VCR (for “DIGITAL IN 3”)
NOTES
• You cannot assign the same component for different terminals.
The priority order for assignment is as follows:
“DIGITAL IN 1” > “DIGITAL IN 2” > “DIGITAL IN 3.”
“DIGITAL IN 1” can be set to any component.
Ex.: When “DIGITAL IN 1” is set to “TV.”
DIGITAL IN 1:
TV
“DVR/DVD,” “DBS,” and “VCR” are selectable for “DIGITAL
IN 2.”
And when “DIGITAL IN 2” is set to “DVR/DVD.”
DIGITAL IN 1:
TV
DIGITAL IN 2:
DVR/DVD
“DBS” and “VCR” are selectable for “DIGITAL IN 3.”
• Setting “DIGITAL IN 1” affects “DIGITAL IN 2” and “DIGITAL IN
3” settings. When you have changed “DIGITAL IN 1,” confirm the
components assigned to “DIGITAL IN 2” and “DIGITAL IN 3.”
Using the Midnight mode
—MIDNIGHT MODE
You can enjoy a powerful sound at night using the Midnight mode.
• Once you have made an adjustment, it is memorized for each
source.
MIDNIGHT MODE: OFF
Select when you want to enjoy surround with its full dynamic
range. (No effect applied.)
MIDNIGHT MODE: 1
Select when you want to reduce the dynamic range a little.
MIDNIGHT MODE: 2
Select when you want to apply the compression effect fully
(useful at night).
Initial setting:
MIDNIGHT MODE: OFF
From the remote control
You can also make adjustments the following way from the
remote control.
Set the mode selector to “AUDIO/TV/VCR/DBS.”
Press SOUND, then press MIDNIGHT
repeatedly to select either one of the
above.
NOTE
After pressing SOUND, the numeric
buttons work for sound adjustments. To
use the numeric buttons to operate your
target source, press the corresponding
source selecting button before operation;
otherwise, the remote control may not
work as you intend.
EN16-25RXF31S[US]2.p65
05.4.23, 16:16
24
