JVC LYT1094-001A, Инструкция по эксплуатации

Страница: 53 / 150

EN
53
Master Page: Right
Still images can be dubbed from a tape to a memory
card.
1
Load a cassette. (
墌
pg. 15)
2
Load a memory card. (
墌
pg. 16)
3
Set the VIDEO/MEMORY Switch to “VIDEO”.
4
Set the Power Switch to “
P
” while pressing
down the Lock Button located on the switch.
5
Set “ COPY” to “ON”. (
墌
pg. 31, 40)
6
Press
4
/
9
to start playback.
7
At the point you want to dub, press
4
/
9
again to
engage Still Playback.
8
To dub the image, press SNAPSHOT .
●
The ” ” indication appears during
dubbing.
●
The selected image is stored in the memory
card.
NOTES:
●
If SNAPSHOT is pressed in step 8 when a memory
card is not loaded, the message “COPYING
FAILED” is displayed.
●
If an image recorded on the tape using “WIDE
MODE” (
墌
pg. 37) is dubbed to a memory card,
the WIDE mode identifying signal is not dubbed
with it.
●
To use Playback Special effects with a video image
you wish to dub, perform up to step
8 using the
remote control (provided). (
墌
pg. 55)
●
Images are dubbed in 640 x 480 pixels.
Dubbing Still Images Recorded On
A Tape To A Memory Card
Power Switch
SNAPSHOT
Button
Lock Button
VIDEO/MEMORY Switch
MENU Button
Play/Pause Button
(
4
/
9
)
+, – Button
SET/SELECT
Button
AD
V
A
NCED FE
A
TURE
S
GR-DVP9-8PAL.book Page 53 Friday, February 7, 2003 12:35 PM