EN
37
Master Page: Right
Wide mode
WIDE MODE
(Factory-preset:
OFF
)
OFF
: Records with no change in the screen ratio.
For playback on a TV with a normal screen ratio.
CINEMA
*
: Inserts black bands at the top and
bottom of the screen. The
indicator appears.
During playback on wide-screen TVs, the black
bands at the top and bottom of the screen are cut
and the screen ratio becomes 16:9. When using
this mode, refer to your wide-screen TV’s
instruction manual. During playback/recording on
4:3 TVs/LCD monitor/viewfinder, black bands are
inserted at the top and bottom of the screen and
the image appears like a letter boxed 16:9 movie.
SQUEEZE
*
: For playback on TVs with an
aspect ratio of 16:9. Naturally expands the image
to fit the screen without distortion. The
indicator appears. When using this mode, refer to
your wide-screen TV’s instruction manual. During
playback/recording on 4:3 TVs/LCD monitor/
viewfinder, the image is elongated vertically.
D.WIDE
*
: The
indicator appears. The
zoom range is extended beyond the maximum
optical zoom wide angle range. This mode’s wide
angle setting is equivalent to using a 0.7X wide
conversion lens. Zooming is possible from 0.7X to
a magnification set in CAMERA Menu. This mode
is suitable for shooting in a small room.
* Available only when the
VIDEO/MEMORY
Switch is set to “VIDEO”.
Wind cut
WIND CUT
(Factory-preset:
OFF
)
OFF
: Disengages the function.
ON
: Helps cut down on noise created by
wind. The “
” indicator appears. The quality of
the sound will change. This is normal.
SYSTEM
Beep, melody and shutter sound
BEEP
(Factory-preset:
MELODY
)
OFF
: Even though not heard while shooting,
shutter sound is recorded on the tape.
BEEP
: The beep sounds when the power is turned
on or off, and at the beginning and end of
recording. It also activates the shutter sound
effect. (
墌
pg. 23, 41)
MELODY
: Instead of a beep, a melody sounds
when any operation is performed. It also activates
the shutter sound effect. (
墌
pg. 23, 41)
Tally lamp setting
TALLY
(Factory-preset:
ON
)
OFF
: The tally lamp remains off at all times.
ON
: The tally lamp comes on to signal the start of
recording.
Remote control setting
For details, refer to “USING THE REMOTE
CONTROL UNIT” (
墌
pg. 54).
REMOTE
(Factory-preset:
ON
)
OFF
: Disables the remote control operations.
ON
: Enables the remote control operations.
Automatic demonstration mode
Demonstrates certain functions such as Program AE
with special effects, etc., and can be used to confirm
how these functions operate. (
墌
pg. 9)
DEMO MODE
(Factory-preset:
ON
)
OFF
: Automatic demonstration will not take
place.
ON
: Demonstrates certain functions such as
Program AE with special effects, etc., and can be
used to confirm how these functions operate.
Demonstration starts in the following cases:
•When the Menu Screen is closed after “DEMO
MODE” is turned “ON”.
•With “DEMO MODE” set to “ON”, if there is no
operation for about 3 minutes after the Power
Switch is set to “
A
” or “
M
”.
Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will
resume.
System Menu
AD
V
A
NCED FE
A
TURE
S
CONTINUED ON NEXT PAGE
GR-DVP9-8PAL.book Page 37 Friday, February 7, 2003 12:35 PM
Содержание LYT1094-001A
Страница 76: ...76 EN INDEX INDEX Controls Connectors And Indicators OFF PLAY A M 4 5 6 1 2 3 8 9 0 q w e r t y u i 7 ...
Страница 84: ...COPYRIGHT 2003 VICTOR COMPANY OF JAPAN LTD EN GR DVP9 GR DVP8 EK Printed in Japan 0203 FO ID VP ...
Страница 101: ...LYT1116 001A ENGLISH Digital Photo Navigator ImageMixer with VCD INSTRUCTIONS ...
Страница 150: ...1102 FO ID COPYRIGHT 2003 VICTOR COMPANY OF JAPAN LTD M3D7 D3 D1 Digital Photo Navigator ImageMixer with VCD ...
