JVC LYT1094-001A, Инструкция по эксплуатации

Страница: 44 / 150

44
EN
Master Page: Left
Manual exposure control is recommended in the
following situations:
●
When shooting using reverse lighting or when the
background is too bright.
●
When shooting on a reflective natural background
such as at the beach or when skiing.
●
When the background is overly dark or the subject
is bright.
1
Set the Power Switch to “
M
” while pressing down
the Lock Button located on the switch.
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
3
Set “
p
” to “MANUAL”. (
墌
pg. 31, 34)
●
The exposure control indicator appears.
4
To brighten the image, press + . To darken the
image, press – . (maximum ±6)
●
+3 exposure has the same effect as the
backlight compensation. (
墌
pg. 45)
●
–3 exposure has the same effect as when “
r
”
is set to “SPOTLIGHT”. (
墌
pg. 33)
5
Press SET/SELECT . Exposure adjustment is
complete.
To return to automatic exposure control...
Set “
p
” to “AUTO”. (
墌
pg. 31, 34) Or, set the
Power Switch to “
A
”.
NOTES:
●
You cannot use the manual exposure control at the
same time when “
r
” is set to “SPOTLIGHT” or
“SNOW” (
墌
pg. 33), or with the backlight
compensation. (
墌
pg. 45)
●
If the adjustment does not cause any visible
change in brightness, set “GAIN UP” to “AUTO”.
(
墌
pg. 31, 35)
Like the pupil of the human eye, the iris contracts in
well-lit environments to keep too much light from
entering, and dilates in dim environments to allow
in more light.
Use this function in the following situations:
●
When shooting a moving subject.
●
When the distance to the subject changes (so its
size in the LCD monitor or the viewfinder
changes), such as when the subject is backing
away.
●
When shooting on a reflective natural background
such as at the beach or when skiing.
●
When shooting objects under a spotlight.
●
When zooming.
When the subject is close, keep the iris locked. Even
when the subject moves away from you, the image
will not darken or brighten.
1
Set the Power Switch to “
M
” while pressing down
the Lock Button located on the switch.
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
3
Set “
p
” to “MANUAL”. (
墌
pg. 31, 34)
●
The exposure control indicator appears.
4
Adjust zoom so that the subject fills the LCD
monitor or the viewfinder, then press and hold
SET/SELECT for over 2 seconds. The exposure
control indicator and the “ ” indication appear.
5
Press SET/SELECT . The “ ”
indication changes to “ ”
and the iris is locked.
To return to automatic iris
control...
Set “ p ” to “AUTO”.
(
墌
pg. 31, 34) Or, set the
Power Switch to “
A
”.
●
The exposure control
indicator and “
” disappear.
To lock the exposure control and the iris…
After step 3 of “Exposure Control”, adjust the
exposure by pressing + or – . Then lock the iris in
step 5 of “Iris Lock”. For automatic locking, select
“AUTO” in step 3 . The iris becomes automatic after
about 2 seconds.
Exposure Control
Power
Switch
+, – Button
BACK LIGHT
Button
SET/SELECT Button
Iris Lock
3
Iris Lock Indicator
FEATURES FOR RECORDING (cont.)
GR-DVP9-8PAL.book Page 44 Friday, February 7, 2003 12:35 PM