JVC KY-PZ100BE, Инструкция по эксплуатации

Страница: 99 / 116

Starting Distribution
1 Perform the necessary setting for the
decoder and PC application.
For details on the settings, please refer to the
“INSTRUCTIONS” of the respective devices
and applications.
Memo :
0
If there is an NAT router within the
communication path between the camera and
the decoder, port forwarding setup is required.
For details on the settings, please refer to the
“INSTRUCTIONS” of the router in use.
0
The following parameters are required when
connecting to this camera recorder using the
RTSP/RTP.
Port number: 554
Stream ID: stream
0
Use the following to access via URL.
rtsp://<IP address of the camera recorder>:554/
stream
2
With the network connection established,
set [Live Streaming] to “On”.
(
A
P36 [Live streaming On/Off button] )
0
Set [Main Menu]
B
[Network]
B
[Live
Streaming Set]
B
[Live Streaming] to “On”.
Memo :
0
You can check the status of distribution on the
status screen.
(
A
P72 [Live Streaming Screen] )
Icon
Status
.
(Red)
Distribution in progress (good
connection quality)
Blinks when distribution starts or
stops
.
(Red)
Distribution in progress (poor
connection quality)
.
(Yellow)
Waiting for connection (during
RTSP/RTP) or connection failed
0
When the
5
icon is displayed, you can view the
details of the error on the [Live Streaming]
screen of the status screen.
.
Cause of
Error
(
A
P103 [List of Live Streaming Error Displays] )
Caution :
0
Streaming may be interrupted momentarily
approximately every 24 hours after the process
started.
Performing Live Streaming
99
Con
nectin
g to the Network