JVC KY-PZ100BE, Инструкция по эксплуатации

Страница: 67 / 116

Install Position
For selecting the location to install the camera.
0
Desktop:
When the camera is mounted on top of a table
or to a tripod. The output image is not inverted
vertically or laterally.
0
Hanging:
When the camera is mounted to the ceiling. The
output image will be inverted both vertically and
laterally.
[Setting Values:
R
Desktop, Hanging]
System Information
9 Version
Displays information on the firmware version.
9
DIP SW
Displays the status of the DIP switch on the bottom
surface of the camera.
0
Left DIP SW 1 to Left DIP SW 8:
[Displayed Value: On, Off]
0 Right DIP SW 1 to Right DIP SW 7:
[Displayed Value: On, Off]
Memo :
0
The On/Off setting cannot be altered in the
menu. Turn on/off the DIP switch manually.
(
A
P23 [DIP Switch Setting] )
9 Open Source License
Displays the license for the open source software
used by this camera recorder.
Record Set Item
Frame Rate
System Mode
Setting Value
(
R
: default value)
1080/60 60p,
R
60i, 30p
1080/50 50p, 50i, 25p
720/60 60p, 30p
720/50 50p, 25p
Memo :
0
The selectable options for Frame Rate vary
according to the [System Mode] setting.
Bit Rate
System
Mode
Frame Rate
Setting Value
(
R
: default value)
1080/60 60p 50M, 28M
1080/50 50p
1080/60 60i 50M,
R
35M, 18M,
5M
1080/50 50i
1080/60 30p 50M, 35M, 18M
1080/50 25p
720/60 60p 35M, 18M
720/50 50p
720/60 30p 18M, 5M
720/50 25p
Memo :
0
The selectable options for Bit Rate vary
according to the [System Mode] and [Frame
Rate] settings.
System Menu
67
Menu
Display and
D
etailed
S
etti
ngs