JVC KY-PZ100BE, Инструкция по эксплуатации

Страница: 51 / 116

2 Select [Main Menu]
B
[TC/UB]
B
“Preset”
and press the Set button (Set).
The [Preset] setting screen appears.
3 Use the cross-shaped button (
HI
) to place
the cursor at the item to set, then use the
cross-shaped button (
JK
) to change the
values.
Numbers between 0 and 9 or alphabets
between A and F can be specified for the user’s
bit.
.
Cursor
Memo :
0
Pressing the [SUB 2] button resets each digit to
“0” and moves the cursor to the hour digit (left).
4
Check the values and press the Set button
(Set).
0
The user’s bit is set and the screen returns to
[TC/UB].
5 Press the [Back] button.
Returns to the normal screen.
Loop Recording
During normal recording, the camera stops
recording automatically when the microSD card
memory is full. In this case, you can enable the
Loop Recording feature for recording to continue.
.
100min
<MANUAL>
1/10000
F1.8
18dB
AE+6
12 :34 : 56
Jan 24 , 2016
00: 00: 00.00
4030 20 10 0
5 6
1 Set [Main Menu]
B
[System]
B
[Record
Set]
B
[Loop Rec] to “On”.
2 Set the frame rate in [Main Menu]
B
[System]
B
[Record Set]
B
[Frame Rate].
(
A
P67 [ Frame Rate ] )
Memo :
0
The [Main Menu]
B
[System]
B
[Record Set]
B
[4GB File Spanning(SDXC)] setting changes to
“On”.
(
A
P68 [ 4GB File Spanning(SDXC) ] )
0
Although recording is continuous, the videos are
not processed as a single clip but as a new file
that contains multiple clips.
0
The clips are automatically split while recording
is in progress.
0
When the remaining space on the card runs out,
files will be deleted automatically starting from
the oldest data and recording will continue
without disruption.
0
During Loop Recording, the remaining level of
the media displayed is the maximum recording
time of the microSD card.
0
However, the maximum recording time of the
card may be shorter than the remaining level that
is displayed.
0
You are recommended to format the card before
using.
Setting the User’s Bit
51
Sh
ooting