58
REMOTE CONTROLLER
REMOTE CONTROLLER
For KW-V320BT Region 1/KW-V220BT Region
1/
KW-V120BT : To use the remote controller,
purchase RM-RK258 separately.
Preparation
❏
Removing the battery sheet
Pull the battery sheet out from
the remote controller
to activate the battery.
❏
Changing the battery of the remote
controller
CR2025 (+side)
• Use a commercially available button battery
(CR2025).
• Insert the battery with the + and – poles aligned
properly.
– If the effectiveness of the remote controller
decreases, replace the battery.
V
Caution:
• Keep the battery out of reach of children and in
original package until ready to use. Dispose of
used batteries promptly. If swallowed contact
physician immediately.
• Do not leave the battery near fire or under direct
sunlight. A fire, explosion or excessive heat
generation may result.
• Do not set the remote control in hot places such
as on the dashboard.
• Danger of explosion if Lithium battery is
incorrectly replaced. Replace only with the same
or equivalent type.
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the unit.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
CALIFORNIA, USA ONLY
This product contains a CR Coin Cell Lithium
Battery which contains Perchlorate Material —
special handling may apply. See www.dtsc.ca.gov/
hazardouswaste/perchlorate
2016̲KW-V̲Entry̲K.indb 58
2016̲KW-V̲Entry̲K.indb 58
2015/09/25 10:48
2015/09/25 10:48
