7
ENGLISH
Before using the remote controller:
When you use the remote controller for the
first time,
pull out the insulation sheet
as
illustrated to the right.
• Aim the remote controller directly at the
remote sensor on the color monitor. Make
sure there is no obstacle in between.
• Do not expose the remote sensor to strong
light (direct sunlight or artificial lighting).
(back side)
Lithium coin battery
(product number:
CR2025)
(back side)
When the controllable range or effectiveness
of the remote controller decreases, replace
the battery.
1. Remove the battery holder.
While pushing in the lock using a ball-point
pen or a similar tool (
1
), pull out the
battery holder in the direction indicated by
the arrow (
2
).
2.
Replace the battery.
Slide a new battery into the holder with
the + side facing upwards so that the
battery is fixed in the holder.
3. Return the battery holder.
Insert the battery holder again pushing it
until you hear a clicking sound.
Replacing the battery
Insulation sheet
Pull out
WARNING:
• Store the battery in a place which children
cannot reach.
If a child accidentally swallows the battery,
immediately consult a doctor.
• Do not recharge, short, disassemble or heat
the battery or dispose of in a fire.
Doing any of these things may cause the
battery to give off heat, crack or start a fire.
• Do not leave the battery with other metallic
materials.
Doing this may cause the battery to give off
heat, crack or start a fire.
• When throwing away or saving the battery,
wrap in tape and insulate; otherwise, it may
cause the battery to give off heat, crack or
start a fire.
• Do not poke the battery with tweezers or
similar tools.
Doing this may cause the battery to give off
heat, crack or start a fire.
CAUTION:
DO not leave the remote controller in a place
(such as dashboard) exposed to direct sunlight
for a long time. Otherwise, it may be damaged.
(The battery has been installed when shipped
from the factory.)
(back side)
1
2
EN02-07KV-MR9000[J]F.pm6
03.3.11, 12:05
7