8
ENGLISH
BASIC OPERATIONS
Preparation
Before operating the monitor system, make sure that all external components are
correctly connected and installed.
1
Open the liquid crystal panel.
The monitor turns on.
Note:
If the liquid crystal panel is already open, press the Power button
(
) on the unit or the Power On/Standby button (
) on the
remote control to turn on the monitor.
CAUTION:
When not in use, close the liquid crystal panel and store it
into the compartment; otherwise it may obstruct the visibility
through the rearview mirror.
2
Select the input source.
Each time you press the button, the input source changes
as follows:
• When KV-C10 is not connected:
• When KV-C10 is connected:
2
2
Monitor
Remote
Monitor Remote
MODE
AV 1
AV 2
VIDEO 1
AV1: NTSC
MODE
MENU
Ex. When “AV 1” is selected
Ex. When “VIDEO 1” is selected
VIDEO 1
TV
VIDEO 2
;;;;;;;;;;;;;
;;;;;;;;;;;;;
;;;;;;;;;;;;;
;;;;;;;;;;;;;
;;;;;;;;;;;;;
;;;;;;;;;;;;;
;;;;;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;;;;;
;;;;;;;;;;;;;
;;;;;;;;;;;;;
;;;;;;;;;;;;;
;;;;;;;;;;;;;
;;;;;;;;;;;;;
;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;
TV TUNER
TV
CH
H / P
VOLUME
MONITOR
MODE
MENU
CALL
R F
VOCAL
SKIP
A.MEMO
3
3
EN08-10KV-MR9000[U]F.pm6
03.3.11, 12:16
8