JVC KD-DV5000, Руководство по обслуживанию

Страница: 18 / 30

1-18 (No.49879)
3.2.10 Removing the spindle motor
(See Fig.21)
• Prior to performing the following procedure, remove the front
end board.
(1) Remove the two screws H attaching the spindle motor on
the bottom of the body.
Caution:
Perform adjustment when reattaching the spindle motor.
Fig.21
3.2.11 Removing the FL motor S.A.
(See Fig.22, 23)
• Prior to performing the following procedure, remove the front
end board.
(1) Remove the feed TRI.spring on the bottom of the body.
(2) Remove the two screws
I attaching the FL motor SA.
(3) Remove the slit washer from the motor H.ass'y and pull out
the worm wheel.
(4) Remove the two screws J attaching the FL motor.
Fig.22
Fig.23
H
Spindl motor
I
FL Motor SA
F.T.Spring
FL Motor
Motor H.ass'y
Worm wheel
J
Slit washer