JVC HR-J295EK, Инструкция по эксплуатации

Страница: 7 / 52

equipment key 7
Diagram Key
REAR PANEL
1 Mains Power Cord
supplies power to VCR.
2
Tying Band Stopper fixes
the main power cord. Do not
drop the tying band into the
inside of the VCR. It may cause
a malfunction.
3
AERIAL Connector enables
connection of aerial.
4
EURO AV1 AUDIO/VIDEO
Connector enables AV
connection to TV or second
VCR; input recordable when
AV1 selected.
5
RF. OUT Connector enables
connection to aerial terminal
of TV receiver.
VCR DISPLAY PANEL
1 Power Indicator lights up
when the VCR is turned on.
2
VCR Indicator lights when
the VCR is in the video mode.
At this point, the TV automati-
cally enters AV mode.
3
Timer Indicator lights
when the VCR enters Timer
mode.
4
Standby/Record
Indicator lights when the
VCR is in standby mode or
during recording.
REMOTE CONTROL
1 STANDBY/ON o Button
turns VCR on/engages the
VCR in the standby mode.
2
TV/VCR Button switches
connected TV’s mode between
TV and AV.
3
AV Button selects VCR’s
auxiliary input mode.
4
Number Keys are used in
preset position selection and
the VIDEO Plus+ Timer
Programming.
5
. Button — same as
button on VCR.
6
1
Button — same as
button on VCR.
7
S
Button stops tape.
8
|
Button — same as
button on VCR.
9
MENU Button accesses
Menu screen.
10 OK Button enters
selections made in on-screen
menus; displays the current
VCR status on the TV screen.
11
^&
[PR+/–] Buttons
select a preset position; used
for selection in on-screen
menus; adjust the tracking
during playback or still
picture.
12
VIDEO Plus+ Button
accesses VIDEO Plus+
Program screen.
FRONT PANEL
1 STANDBY/ON o Button
turns VCR on/off (loading a
cassette also turns power on).
2
§
Button stops tape;
ejects tape during Stop mode.
3
Cassette Loading Slot is
where cassette is inserted;
door closes.
4
|
Button stops tape
temporarily during recording;
stops tape temporarily during
playback.
5
1
Button rewinds the
tape; initiates high-speed
reverse search.
6
¡
Button fast-forwards
tape; initiates high-speed
forward search.
7
PR +/– Buttons select a
preset position.
8
Display Panel shows the
condition of the VCR.
9
Infrared Beam Receiving
Window is where Remote
Control should be aimed when
in use.
10
T
Button starts regular
recording.
11
.
Button
plays back tape;
cancels Pause, Still, Search
modes.
13 TV AV Button enables
Remote Control of your JVC TV.
14
TV PR +/– Buttons selects
the connected JVC TV's
channel.
15
* Buttons are not available
with this VCR.
16
0
Button ejects tape
during Stop mode.
17
3
Button
initiates a 30-second period of
fast-motion playback.
18
10
y
Button initiates
Ez (Easy) Power Off function.
19
Button initiates Ez
(Easy) repeat playback.
20
¡
Button — same as
button on VCR.
21
/ Button selects tape
speed.
22
T
[ITR] Button starts
regular recording (press once),
Instant Timer Recording (press
twice); sets duration of ITR.
23
0000 Button resets
counter on the on-screen
display to ‘0:00:00’.
24
*T
Buttons used for
selection in on-screen menus.
25
Button
enables/
disables the child lock mode.
26 TV
o
Button turns JVC
TV on/off.
27
TV +/– Buttons control
volume of connected JVC TV.
ATTENTION:
To mobile phone users:
Using a mobile phone in the vicinity of the VCR may cause picture vibration on the
TV screen or change the screen to a blue back display.
On placing the VCR:
Some TVs or other appliances generates strong magnetic fields. Do not place such
appliance on top of the VCR as it may cause picture disturbance.
About
o
Button
When you press o on the VCR and remote control while the VCR is turned on,
each button works differently.
On the VCR
When you press o , the VCR is turned off completely.
On the Remote Control
When you press
o
, the VCR enters the standby mode. lights on the
display panel. To turn off the VCR completely, press
o
on the VCR.
How to use the Remote
Control
Before use, insert the batteries in the
correct directions as indicated under
the battery cover. The Remote
Control can operate most of your
VCR’s functions, as well as basic
functions of JVC TV sets.
•
Point the Remote Control toward
the receiving window on the VCR.
•
The maximum operating distance
of the Remote Control is about
7.5 m.
•
To operate your JVC TV, press the
corresponding button:
TV
o ,
TV
AV
,
TV PR +/–
,
TV +/–
(TV
Volume).
NOTE:
If the Remote Control does not work
properly, remove its batteries, wait
for a few seconds, replace the
batteries and then try again.
HR-J295EK-EN/p02-07 3/15/2, 3:33 PM 7