JVC GZ-R18, Подробное руководство пользователя

Страница: 73 / 134

Preparing a DVD Writer (CU-VD50)
1
Open the terminal cover.
2
Connect the USB cable and the AC adapter of the DVD writer.
0 Before making any connection, close the LCD monitor to turn off this
unit.
.
A
Connect the USB cable provided with the DVD writer to the USB
conversion cable provided with this unit to connect to this unit.
B
Connect the AC adapter of the DVD writer.
0 Turn on the DVD writer.
0 Refer also to the instruction manual of the DVD writer.
3
Open the LCD monitor.
.
0
This unit turns on and the “BACK-UP” menu appears.
0 While the USB cable is connected, the “BACK-UP” menu is
displayed.
4
Insert a new disc.
.
A
Press the eject button.
B
Pull out the disc tray.
C
Pull out the tray completely and load a new disc properly.
D
Push the disc tray in until it clicks into place.
Caution :
0 Be sure to turn off the power when connecting the devices.
Otherwise, electric shocks or malfunctions may occur.
Memo :
0 All buttons on the DVD writer CU-VD50, other than the power and eject
buttons, will not work when connected to this unit.
Creating a Disc
Caution :
0 You cannot create a disc if the remaining battery power is not enough.
Charge this unit fully beforehand.
1
Prepare a DVD writer.
0 Insert a new disc into the DVD writer.
“Preparing a DVD Writer (CU-VD3)” (
A
p. 72)
“Preparing a DVD Writer (CU-VD50)” (
A
p. 73)
2
Copy files to the disc with the following methods.
“Copying All Files” (
A
p. 74)
“Copying Selected Playlists” (
A
p. 75)
“Copying Selected Files” (
A
p. 76)
Copying
73