JVC GZ-R18, Подробное руководство пользователя

Страница: 7 / 134

Resetting this Unit
When a malfunction occurs on this unit, reset the unit in the following way.
1
Open the terminal cover.
0
Remove the power cord and all connecting cables.
2
Close the LCD monitor to turn off this unit.
3
Press the Reset button gently using an object with pointed tip.
Caution :
0 Press the Reset button just once gently.
0
Do not use sharp pointed objects. It may damage the unit or cause electric
shock.
Memo :
0 If malfunction persists even after pressing the Reset button, refer to
“Troubleshooting” (
A
p. 123) .
Quad Proof
This unit is equipped with Waterproof, Dust-proof, Drop-proof and Freeze-
proof features.
.
.
Waterproof:
Equivalent to IEC
Standard publication
529 IPX8 (30 minutes
at depths up to 5 m)
.
Dust-proof: Equivalent
to IEC Standard
publication 529 IP5X
.
Drop-proof: This
camera clears
company testing
compliant with MIL-
STD-810F Method;
516.5
Shock: Dropping onto
plywood 3 cm thick
from a height of 1.5 m
.
Freeze-proof:
Allowable operating
temperatures: −10°C
to +40°C
Note: Temperatures
between −10°C and
0°C temporarily lower
battery performance,
reducing the time
available for recording.
Caution :
0 There is no guarantee that there will be no damages when the unit is used
within the above-mentioned limits.
Scratches and dent caused by the impact if the unit is dropped, or other
changes in appearance are not included in the warranty.
0
Malfunction due to mishandling will void the warranty.
0 Before use in water, be sure to read and understand the “Before Using
Underwater or under Low Temperature” (
A
p. 8) .
0 Close the terminal cover firmly until it clicks and confirm that the red sign
completely goes off.
0
Make sure that there is no damage to and no foreign material adhered to
the packing inside the cover.
0 Use within a water depth of 5 m and a duration of 30 minutes.
0 The waterproof performance cannot be guaranteed if the camcorder is
subject to impact such as dropping.
0
Do not jump or dive into water holding the camcorder.
0 Do not use the camcorder in strong water flows such as in rapids or under
waterfalls. The strong water pressure may impair the waterproof
performance.
0 Do not immerse into hot spring, or hot water above 40°C.
Getting Started
7