JVC GY-HM170E, Инструкция по эксплуатации

Страница: 74 / 212

1 Select [TC/UB]
B
[TC Preset] and press the
Set button (
R
).
(
A
P111 [ TC Preset ] )
The [TC Preset] screen appears.
.
1
TC Preset 00:00:00:00
TC/UB
Memo :
0
When [TC/UB]
B
[TC Generator] is set to
“Regen”, the parameter is displayed as “Regen”
and cannot be selected.
(
A
P111 [ TC Generator ] )
2 Set the time code (hour, minute, second,
frame).
Use the cross-shaped button (
HI
) to place the
cursor at the item to set, then use the cross-
shaped button (
JK
) to change the values.
.
During drop frame
During non-drop
frame
Cursor
TC Preset
00:00:00:00
TC/UB
Memo :
0
Press the [C.REVIEW/4] button to reset each
digit to “0”. The cursor moves to the time digit
(left).
3 Check the values and press the Set button
(
R
).
0
The time code is set and the screen returns
to [TC/UB].
0
To cancel the setting, press the [CANCEL/
STOP] button.
4 Press the [MENU/THUMB] button.
Returns to the normal screen.
Setting Time Code without Opening the
Menu
.
Memo :
0
Settings cannot be made in the following cases.
0
[TC/UB]
B
[TC Generator] has been set to
“Regen”.
0
Menu screen is displayed.
0
The camera recorder is not in the Camera
mode.
Setting Time Code
1 Set [TC/UB]
B
[TC Generator] to “Rec Run”
or “Free Run”.
(
A
P111 [ TC Generator ] )
2 Press the [TC/2] button.
The [TC Preset] setting screen appears.
.
TC Preset
During drop frame
During non-drop frame
Cursor
3 Set the time code (hour, minute, second,
frame).
Use the cross-shaped button (
HI
) to place the
cursor at the item to set, then use the cross-
shaped button (
JK
) to change the values.
Memo :
0
Press the [C.REVIEW/4] button to reset each
digit to “0”. The cursor moves to the time digit
(left).
74
Setting Time Code Generator
Shooting