JVC GR-DVM80 Скачать руководство пользователя страница 62

Страница: 62 / 76

SYMPTOM

POSSIBLE CAUSES

CORRECTIVE ACTION

35.

• During playback of the

unrecorded portion, High-speed
Search and still playback, LCD
monitor indications appear
distorted. This is not a defect.

36.

• The speaker volume is too great.

37.

————

38.

————

39.

————

40.

• A malfunction of some kind

has occurred. In this case the
camcorder’s functions
become unusable.

41.

• The temperature of the battery

is extremely high/low.

• Charging is difficult in places

subject to extremely high/low
temperatures.

42.

• The viewfinder is pulled out.
• The LCD monitor's brightness

setting is too dark.

43.

• This is not a malfunction.

44.

• The DV cable was plugged/

unplugged with power turned
on.

45.

————

35.

————

36.

• Turn the speaker volume down

(

墌

pg. 36).

37.

•Clean the video heads with an

optional cleaning cassette
(

墌

pg. 70).

38.

• Wipe them gently with soft

cloth. Wiping strongly can
cause damage (

墌

pg. 57).

39.

• Check the section of the

manual that explains LCD
monitor/viewfinder indica-
tions (

墌

pg. 66 – 68).

40.

• Remove the power supply

(battery pack, etc.) and wait a
few minutes for the indication
to clear. When it does, you can
resume using the camcorder.
If the indication remains even
though you repeat the above
two or three times, please
consult your nearest JVC dealer.

41.

• To protect the battery, it is

recommended to charge it in
places with a temperature of
10°C to 35°C (50°F to 95°F)
(

墌

pg. 69).

42.

• Push the viewfinder back in.
• Adjust the brightness of the

LCD monitor (

墌

pg. 16).

• If the monitor is tilted upward

180 degrees, open the
monitor fully (

墌

pg. 16).

43.

• By recording with “DIS”

activated (

墌

pg. 26) this can

be avoided.

44.

• Turn the camcorder’s power off

and on again, then operate it.

45.

• Do not subject the camcorder

to shock or excessive
vibration during transport.

• Turn the camcorder on and

off. The lens cover closes.

35.

The LCD monitor image is
distorted.

36.

Images on the LCD monitor
are jittery.

37.

Blocks of noise appear
during playback, or there is
no playback picture and the
screen becomes blue.

38.

The LCD monitor, the
viewfinder and the lens have
become dirty (ex. fingerprints).

39.

An unusual mark appears.

40.

An error indication
(E01 — E06) appears.

41.

The charger indicator on the
AC Power Adapter/Charger
does not light.

42.

Picture does not appear on
the LCD monitor.

43.

When the image is printed
from the printer, a black bar
appears at the bottom of the
screen.

44.

When the camcorder is
connected via the DV
connector, the camcorder
does not operate.

45.

During transport, the lens
cover opens.

TROUBLESHOOTING

(cont.)

Содержание GR-DVM80












































































Результаты поиска

Содержание GR-DVM80

Отзывы:

Похожие инструкции для GR-DVM80

Бренды по названию

Популярные бренды

JVC GR-DVM80, Инструкция по эксплуатации

Результаты поиска

Содержание GR-DVM80

Отзывы:

Похожие инструкции для GR-DVM80

Бренды по названию

Популярные бренды