JVC GR-DVM5 Скачать руководство пользователя страница 74

Страница: 74 / 92

SYMPTOM

POSSIBLE CAUSES

CORRECTIVE ACTION

35.

•The LCD monitor or the

viewfinder is made with

high-precision technology.

However, black spots or

bright spots of light (red,

green or blue) may appear

constantly on the LCD

monitor or the viewfinder.

These spots are not recorded

on the tape. This is not due

to any defect of the unit.

(Effective dots: more than

99.99 %)

36.

•During playback of the

unrecorded portion, High-

speed Search and still

playback, LCD monitor

indications appear distorted.

This is not a defect.

37.

————

38.

•A malfunction of some kind

has occurred. In this case

the camcorder’s functions

become unusable.

39.

•The temperature of the

battery is extremely high/

low.

•Charging is difficult in places

subject to extremely high/

low temperatures.

40.

•This occurs when recording

in the LP mode is not

available. After the indicator

blinks, the recording mode

switches to “SP” and

recording goes on.

41.

•The viewfinder is pulled out.

•The LCD monitor's bright-

ness setting is too dark.

42.

•This is not a malfunction.

35.

————

36.

————

37.

• Check the section of the

manual that explains LCD

monitor/viewfinder

indications (

pgs. 79 –

81).

38.

• Remove the power supply

(battery pack, etc.) and

press RESET button, and

wait a few minutes for the

indication to clear. When it

does, you can resume using

the camcorder.

If the indication remains

even though you repeat the

above two or three times,

please consult your nearest

JVC dealer.

39.

• To protect the battery, it is

recommended to charge it

in places with a temperature

of 10°C to 30°C (50°F to

86°F) (

pg. 11).

40.

————

41.

• Push the viewfinder back in.

• Adjust the brightness of the

LCD monitor (

pg. 24).

• If the monitor is tilted

upward 180 degrees, open

the monitor fully

(

pg. 25).

42.

• By recording with Digital

Image Stabilizer set to “ON”

(

pg. 34) this can be

avoided.

35.

Colored bright spots

appear all over the LCD

monitor or the viewfinder.

36.

The LCD monitor

indications are distorted.

37.

An unusual mark appears

in the LCD monitor or the

viewfinder.

38.

An error indication

(E01 — E06) appears in

the LCD monitor or the

viewfinder.

39.

The charge indicator on

the AC Charger Station

does not light.

40.

The recording mode

indicator “LP” blinks on

the LCD monitor or the

viewfinder.

41.

Picture does not appear

on the LCD monitor.

42.

When the image is printed

from the printer, a black

bar appears at the bottom

of the screen.

TROUBLESHOOTING

(Cont.)

Содержание GR-DVM5




























































































Результаты поиска

Содержание GR-DVM5

Отзывы:

Похожие инструкции для GR-DVM5

Бренды по названию

Популярные бренды

JVC GR-DVM5, Инструкция по эксплуатации

Результаты поиска

Содержание GR-DVM5

Отзывы:

Похожие инструкции для GR-DVM5

Бренды по названию

Популярные бренды