JVC GR-DVM5, Инструкция по эксплуатации

Страница: 69 / 92

EN
69
7 CLOSE MENU
Press the Select Dial twice.
•Now perform Random Assemble Editing
beginning with step 2 on page 65.
NOTES:
●
Before performing actual Random Assemble
Editing, do a few Random Assemble Editing trial
runs to check whether the value you have input is
appropriate or not, and make adjustments
accordingly.
●
Depending on the recorder, there may be
situations where the timing difference cannot be
fully corrected.
4 ACCESS PLAYBACK MENU
Point the remote control at the camcorder’s
remote sensor and press R.A. EDIT ON/OFF to
make the Random Assemble Editing menu
disappear, then press MENU. The Playback
Menu appears on the TV screen.
5
SELECT FUNCTION
Move the pointer and highlight bar to
“SYNCHRO” by rotating the Select Dial, then
press it. The value for “SYNCHRO” is high-
lighted.
6 INPUT CORRECTION DATA
Based on the diagnostics performed (
Z
pg. 68),
you can now increase the VCR’s speed by
rotating the Select Dial upward. You can also
slow down the VCR’s speed by rotating the
Select Dial downward. The adjustment range is
from –1.3 to +1.3 seconds, in 0.1-second
increments.
SOUND1
0 . 0
ON
OFF
FULL SOUND 48kHz MODE
32kHz MODE
DISPLAY
TIMECODE
SYNCHRO
END
4
SOUND1
0 . 0
ON
OFF
FULL SOUND 48kHz MODE
32kHz MODE
DISPLAY
TIMECODE
SYNCHRO
END
4
OFF
P
L
A
Y
A
M
5S
Adjustment of VCR‘s against Camcorder Timing
VCR
(Recording deck)
Playback Menu
Power Dial
Lock button
Select Dial
MENU button
Display