5
Front panel
Remote sensor:
Point the front end of the remote control toward here.
Eco sensor:
Detects brightness of the room (see page 13).
Self-diagnostic lamps:
These lamps light/flash if something abnormal
occurs with the monitor (see page 21).
Power lamp:
When the monitor is turned off: Unlit.
When the monitor is turned on: Lights in green.
When the monitor is in sleep mode: Flashes in
orange.
When the monitor is in standby mode: Lights in
orange.
Rear panel
Input card slots (SLOT-1, SLOT-2):
Optional input cards can be installed in these slots.
• For details about input cards, refer to the
instructions of the input card.
REMOTE terminals
Connect external control equipment (see pages 8, 17 to 19).
RS-232C terminal:
Connect to the RS-232C terminal of a
personal computer.
RS-485 terminals:
IN terminal:
Connect external control equipment.
OUT terminal:
Connect another component to send
out the control signal coming into the IN
terminal (cascade connection).
AUDIO OUT terminals
Connect external speakers or audio equipment.
EXT. SPEAKER terminal:
Connect external speakers (commercially available) (see page 6).
• To use this terminal, set “SPEAKER SELECT” on the main menu to “EXT. (external)” (see page 12).
MONITOR OUT terminals:
Connect to the audio input terminals of audio equipment such as an amplifier
(see page 8).
AUDIO IN A/B terminals
Connect audio output terminals of equipment such as a
VCR (see page 8).
AUDIO IN A terminal
R, L/MONO terminals (pin jack):
Connect to the audio output terminals of the
equipment connected to the VIDEO IN A terminal.
(Connect only the L/MONO terminal for monaural
sound.)
AUDIO IN B terminal
STEREO terminal (stereo mini jack):
Connect to the audio output terminals of the
equipment connected to the VIDEO IN B terminal.
VIDEO IN A/B terminals
Connect video output terminals of equipment such as a VCR (see page 8).
VIDEO IN A terminal
IN terminal (BNC):
Connect to the video output terminals of playback equipment such as a VCR.
OUT terminal (BNC):
Connect to the video input terminal of another monitor, etc.
Y/C IN terminal (Y/C):
Connect to the S-video output terminal of playback equipment such as a
VCR.
•
When both IN terminal and Y/C IN terminal are used, the input to the Y/C IN terminal has priority.
VIDEO IN B terminal
RGB/COMPO. terminal (D-sub 15-pin)
*
1
:
Connect to the video output terminal of a personal
computer or playback equipment such as a VCR
*
2
.
DVI-D terminal (DVI-D)
*
1
:
Connect to the digital output terminal of a personal computer.
*1
When connecting to a personal computer, use a cable with ferrite cores and no longer than of 3 m (118
1
/
8
”) to avoid
electromagnetic disturbance.
*2
You may need a conversion cable (commercially available).
1
(Power) button: Turns the monitor on/off (see page 9).
2
INPUT button:
Changes inputs (see page 9).
3
MENU button:
Displays the main menu (see page 10).
4
5
/
∞
buttons:
Selects an item on the menu (see page 10).
5
+/– buttons:
Adjusts the volume level (see page 9).
• When the menu is displayed, adjusts the value (see page 10).
6
SET-UP button:
Displays the set-up menu (see page 10).
AC IN terminal:
Connect the supplied power cord (see page 8).
POWER switch:
I :
Turns on the main power. (The power can be
controlled by POWER ON/OFF buttons on the remote
control or
button on the main unit.)
‡
:
Turns off the main power.
GM-H40L2UA_resize-2.indd 5
GM-H40L2UA_resize-2.indd 5
06.7.28 1:44:04 PM
06.7.28 1:44:04 PM