JVC DT-F9L5, Инструкция по эксплуатации

Страница: 34 / 56

34 34
Menu Configuration (cont.)
Focus Assist (DT-F9L5 only)
Settings for the focus assist function.
Item To do Setting value
Focus Assist Mode
Activate / deactivate the function. Off, On
Focus Assist Color Setting the focus assist color. Red, Green, Blue
Peaking Frequency Setting the frequency of focus assist. Low, Middle, High
Peaking Gain Setting the gain of focus assist. 1 to 10
●
When the function is turned on, the area in focus is colored in the selected color.
●
When the function is turned on, the color is off.
●
When the function is turned on,
FA
is displayed on the monitor as below.
FA
Signal Setting
Settings for input signals.
Item To do Setting value
Video/Component Select
Selects the signal type you want to use for VIDEO/COMPONENT terminals. Video, Component
I/P Mode Selects a proper mode corresponding to the input picture. Normal, Cinema
Color System Select the color system. Auto, NTSC, PAL, SECAM,
NTSC 4.43, PAL-M, PAL-N,
PAL60
• If the picture is unstable with “Auto,” select the color system according to the input signal.
sub menu Display the sub menu which enables you to adjust the items in “Signal Setting” while viewing the actual picture.
reset Restore the default settings for all the items in “Signal Setting”.
Marker*
1
Settings for marker functions.
Item To do Setting value
1/2 Area Marker Activate/deactivate the area marker and select the style of it.
The setting values and features are as follows. Off, Line, Half, Half+Line
Off
Line
Half
Half+Line
:
:
:
:
Deactivate the marker.
Displays the area with an outline.
The area outside the specified aspect ratio of the screen is displayed at 50%
transparency.
The area of the specified aspect ratio of the screen is indicated by an outline,
and the area outside of that is displayed at 50% transparency.
Marker Aspect Select the aspect ratio of the area marker. 4:3, 16:9, 14:9, 13:9, 2.35:1,
1.85:1, 1.75:1, 1.66:1
Safety Marker Activate/deactivate the safety marker and select the style of it.*
2
Off, Line, Half, Half+Line
Safety Area Adjust the area of the safety marker. 80% to 100%
Frame* 3 Displays/Hides the video area. Off, On
Center Marker* 3 Displays/hides the marker indicating the center position of the picture. Off, On
Line Brightness Adjust the brightness of the marker. Low, High
2/2 R-Area Marker
Activate/deactivate the area marker and select the style of it.*
2
Off, Line, Half, Half+Line
R-Marker Aspect
Select the aspect ratio of the area marker.
4:3, 16:9, 14:9, 13:9, 2.35:1,
1.85:1, 1.75:1, 1.66:1
R-Safety Marker
Activate/deactivate the safety marker and select the style of it.*
2
Off, Line, Half, Half+Line
R-Safety Area
Adjust the area of the safety marker.
80% to 100%
●
The area marker or the safety marker is displayed by using MARKER button or external control.
●
“R” means “REMOTE (External control)”. Select either non-“R-” items or “R-” items to activate by using external control. (
☞
“External Control” on
page 42)
●
When a picture is displayed in 4:3 aspect ratio, the safety marker for the 4:3 area is displayed.
●
To display the safety marker for the area of a picture displayed in 16:9 aspect ratio, set Area Marker to "Off".
* 1 Memorized for each input.
* 2 The setting values are the same as that of “Area Marker”.
* 3 In 1:1 mode, this display is grayed out and cannot be operated.
DT-F9L5̲EU.indb 34 DT-F9L5̲EU.indb 34 2012/12/18 14:13:06 2012/12/18 14:13:06