38
38
Menu Configuration (cont.)
Picture Sub Adjust
Configure the standard level of image adjustment.
Item To
do
Setting value
Contrast*
1
Adjust the standard level for the contrast adjusted with the CONTRAST knob on the front
panel.
–20 to +20
Bright*
1
Adjust the standard level for the brightness adjusted with the BRIGHT knob on the front
panel.
–20 to +20
Chroma*
1
Adjust the standard level for the chroma adjusted with the CHROMA knob on the front panel. –20 to +20
Phase*
1,
*
2
Adjust the standard level for the phase adjusted with the PHASE knob on the front panel.
–20 to +20
NTSC Setup
Select the set-up level of the input NTSC signal.
00 (compliant with 0 %
set-up signal), 7.5 (compliant
with 7.5 % set-up signal)
Component Level
Select the level of the analog component signal (480i and 576i only).
B75 (compliant with
BetacamVTR 7.5 % set-up
signal), B00 (compliant with
BetacamVTR 0 % set-up
signal), SMPTE (compliant
with M2VTR signals)
sub menu
Display the sub menu which enables you to adjust the items in “Picture Sub Adjust” while viewing the actual picture.
reset
Restore the default settings for all the items in “Picture Sub Adjust”.
*
1
Memorized for each input.
*
2
When “Component Phase”
(
☞
page 37) is set to “Disable,” “Phase” cannot be adjusted if no NTSC signal is input.
White Balance Setting
Display the color temperature, and adjusts the drive level and cutoff point of each color (R/G/B).
Item To
do
Setting value
Color Temperature
Select the color temperature. (Cannot be set/changed)
9300K, 6500K, User
R Drive *
1
G Drive
B Drive
Adjust the drive level of each color (red, green, and blue).
●
The maximum (Max) and minimum (Min) values vary depending on the input signal or
other settings.
Min – 000 – Max
(in 1024 grades)
R Cut Off *
1
G Cut Off
B Cut Off
Adjust the cutoff point of each color (red, green, and blue).
●
The maximum (Max) and minimum (Min) values vary depending on the input signal or
other settings.
Min – 000 – Max
(in 1024 grades)
sub menu
Display the sub menu which enables you to adjust the items in “White Balance Setting” while viewing the actual picture.
reset
Restore the default settings for all the items in “White Balance Setting”.
*
1
Memorized for each color temperature.
Remote Setting
Settings for the external control.
Item To
do
Setting value
Parallel Type
Select a control method of the MAKE/TRIGGER terminal.
Make, Trigger, Set
Pin1
Assign the control functions to the pins of the MAKE/TRIGGER terminal.
•
Assign a function to each pin terminal by selecting “Set” in “Parallel Type” mentioned
above.
☞
"Display" in "Functions
controlled by the MAKE/
TRIGGER system" on page 43
Pin2
Pin3
Pin4
Pin5
Pin6
The functions are assigned for “Pin6” – “Pin8” and you cannot change the assignment of
these functions.
Tally
Pin7
Enable
Pin8
GND
DT-F9L5̲EU.indb 38
DT-F9L5̲EU.indb 38
2012/12/18 14:13:07
2012/12/18 14:13:07
Содержание DT-F9L5
Страница 53: ...53 53 MEMO DT F9L5 EU indb 53 DT F9L5 EU indb 53 2012 12 18 14 13 11 2012 12 18 14 13 11 ...
Страница 54: ...54 54 MEMO cont DT F9L5 EU indb 54 DT F9L5 EU indb 54 2012 12 18 14 13 11 2012 12 18 14 13 11 ...
Страница 55: ...55 55 DT F9L5 EU indb 55 DT F9L5 EU indb 55 2012 12 18 14 13 11 2012 12 18 14 13 11 ...
