JVA JMB Series, Руководство пользователя

Страница: 17 / 64

Description
Page 17 © JVA Technologies. www.jva-fence.com
Status LED Flashes Meaning Corrective Action
1 Tamper Alarm Replace the LID, or Fit
J12 inhibit tamper
2 24Vdc power fail Restore power, check
the main power fuse
3 Low battery, bad battery Charge or replace bat -
tery, check the battery
fuse
4 PCb service fault Return to repair/service
centre to be checked by
a technician
Table 4 - LED Error Codes
6.2 ARMING SWITCH
When arming or disarming the energizer on you can use the Switch on the
side of the enclosure. If you have a JMBx-ZM2 there will be 2 Switches, one
controls Zone 1 and the other controls Zone 2.
To turn them on you will need to flick the button so the side with the “I”
is pressed down. If the energizer is armed and disarmed using an external
control method such as the virtual keypad, the switch is not a reliable indi -
cator of the armed state. External control methods will require the switch
to be flicked to take control back.
It is recommended that you use the switch for manual testing.