juwel HeliaLux SmartControl, Инструкция по эксплуатации

Страница: 22 / 27

Functions using the buttons on the device
Service Mode
Ideal for aquarium maintenance work
All the colours of your HeliaLux lamps will light up with 100% luminosity for 60 minutes
in Service Mode:
Activation
: Press and hold the ' Mode ' button for 3 seconds.
Info
The luminosity can be successively reduced by briefly pressing the 'Mode'
key in Service Mode.
Deactivation
: Press and hold the ' Mode ' button again for three seconds. The HeliaLux
SmartControl will then switch back to Auto Mode (operating mode). The HeliaLux
SmartControl will automatically switch back to Auto Mode (operating mode) if it is not
switched off manually within 60 minutes.
Access Point Mode (AP Mode)
Info
If you are not operating the SmartControl in Access Point Mode, but the
connection to a Wi-Fi home network fails, you can still access the user
interface by pressing the key combination to return the SmartControl to
Access Point Mode.
Activation
: Press the '
Reboot
' button once, then press the '
Mode
' button once to do so.
Reboot
Press the 'Reboot' button once
Demo-Mode
Activation
: Press and hold the ' Mode ' button for 20 seconds.
Deactivation
: Press and hold the '
Mode
' button for 3 seconds to exit Demo Mode. The
HeliaLux SmartControl will then switch back to Auto Mode (operating mode).
Info
The SmartControl will also start in Demo Mode after a restart when Demo
Mode has been activated.
Reset
Press the 'Reboot' button once and then press and hold the 'Mode' button
for 10 seconds.
Notice
All settings will be lost when you do so.
Access Point Mode creates its own wireless network to which Wi-Fi capable devices
are able to connect. •
Executes a system restart of the HeliaLux SmartControl. •
The HeliaLux lamp dims up and down in various light configurations in Demo Mode. •
Resets the HeliaLux SmartControl to the factory settings. •
22