Commissioning of the JUWEL Bioflow ONE filter
You should make the filter ready for use before setting up the aquarium, but do not
yet connect the electrical components to the power supply.
The JUWEL Bioflow ONE filter is consists of:
- Pump
- Filter housing with slot for the heater (optionally available)
- 2 blue filter sponges - bioPlus fine ONE
- 4 suction cups
- O2 diffuser
Prior to initial use of the filter, open the filter housing and remove the filter sponges,
in order to rinse them out under running water.
Reinsert the filter sponges into the filter housing and close it.
Now, insert the suction cups into the designated openings of the filter housing and
attach the filter in the rear right corner of the aquarium.
Now, attach the O2 diffuser (with assembled air hose and controller) onto the pump
outlet of the pump.
The JUWEL Bioflow ONE filter is now operational.
The JUWEL Aquarium Filter System is a biological filter system. For it to work
effectively, bacteria cultures will need to grow inside the blue sponges. This process
can take up 6-8 weeks for the filter to fully mature. Consequently we recommend to
decorate and plant the aquarium and add just a few (3-5) hardy fish in order to help
the maturation process. Please test the water on a weekly basis to monitor the water
conditions and once the water is safe you can begin to add more fish.
Servicing and maintenance of the JUWEL Bioflow ONE filter
BioPlus fine ONE - Replace one of the blue filter sponges at an interval of approx. 3
months.
3
