22
2 Preparation
T
Place a cup under the coffee spout.
T
Press and
hold
the
‘Coffee’
button.
‘Coffee’
and the fill volume are displayed.
T
Hold
the
‘Coffee’
button down until
‘Enough coffee? Press
button.’
appears.
T
Release the
‘Coffee’
button.
Preparation starts and the coffee flows into the cup.
T
Press any button as soon as there is sufficient coffee in the
cup.
Preparation stops.
‘Saved’
appears briefly on the display. The
set amount of water for one coffee is permanently stored.
‘Please select product:’
appears on the display.
E
You can alter this setting at any time by repeating the above
procedure.
E
The amount can be permanently adjusted to the cup size for
the products shown in the product selector too. To do this,
press and hold the Rotary Switch
k
until
‘Enough coffee?
Press button.’
appears.
E
You can also permanently set the amount for all speciality cof-
fees, milk and hot water in programming mode (see Chap-
ter 4 ‘Permanent settings in programming mode – Product
settings’).
