background image

8

Important information

 

U

Do not immerse the IMPRESSA, mains cable or 
connections in water.

 

U

Do not put the IMPRESSA or any individual 
parts in the dishwasher.

 

U

Switch your IMPRESSA off at the power switch 
before any cleaning operation. Always wipe 
the IMPRESSA with a damp cloth rather than a 
wet one, and protect it from prolonged expo-
sure to water splash.

 

U

Only connect the machine to the mains volt-
age in accordance with the information on the 
rating plate. The rating plate is located on the 
underside of your IMPRESSA. Further technical 
data is provided in these instructions for use 
(see Chapter 9 ‘Technical data’).

 

U

Please only use original JURA maintenance 
products. Use of products that are not explic-
itly recommended by JURA could damage the 
IMPRESSA.

 

U

Do not use any coffee beans treated with addi-
tives or caramelised coffee beans.

 

U

Only fill the water tank with fresh, cold water.

 

U

Switch the machine off at the power switch if 
you are going to be absent for a longer period 
of time.

 

U

Children may not carry out cleaning or main-
tenance without supervision by a responsible 
person.

 

U

Do not allow children to play with the machine.

 

U

Keep children under 8 years of age away from 
the machine and/or supervise them con-
stantly.

Содержание IMPRESSA Z9 One Touch TFT

























































Отзывы: