Jura IMPRESSA J9.4 One Touch TFT Скачать руководство пользователя страница 42

Страница: 42 / 52

6 Display

messages

6 Display

messages

Message

Cause/Result

Action

‘Fill water tank’

The water tank is empty. You
cannot prepare any products.

Fill the water tank (see Chapter 1

‘Preparing and using for the first
time – Filling the water tank’).

‘Empty coffee
grounds container’

The coffee grounds container
is full. You cannot prepare any
products.

Empty the coffee grounds container

and the drip tray (see Chapter 3 ‘Daily
operation – Daily maintenance’).

‘Empty drip tray’

The drip tray is full. You cannot
prepare any products.

Empty the drip tray and the coffee

grounds container.

Clean and dry the metal contacts on

the back of the drip tray.

‘Drip tray not fitted’

The drip tray is not inserted
correctly or is not inserted at all.
You cannot prepare any
products.

Fit the drip tray.

‘Please press the
Rotary Switch.’

The IMPRESSA is prompting you
to perform a rinse or continue
a maintenance programme that
was already started.

Press the Rotary Switch to start the

rinse or to continue the maintenance
programme.

‘Fill bean container’

The bean container is empty.
You cannot prepare any
products.

Fill the bean container (see Chapter 1

‘Preparing and using for the first
time – Filling the bean container’).

‘Rinse the milk
system’

The IMPRESSA is prompting
you to rinse the milk system.

Press the Rotary Switch to start

rinsing the milk system.

‘Change filter’

‘Change now’

The filter cartridge no longer
works.

Replace the CLARIS Blue filter

cartridge (see Chapter 5 ‘Mainte-
nance – Changing the filter’).

‘Clean machine’

‘Clean now’

The IMPRESSA is prompting
you to clean it.

Perform cleaning (see Chapter 5

‘Maintenance – Cleaning the
machine’).

‘Decalcify machine’

‘Decalcify now’

The IMPRESSA is prompting
you to descale it.

Perform descaling (see Chapter 5

‘Maintenance – Descaling the
machine ’).

Содержание IMPRESSA J9.4 One Touch TFT





















































Результаты поиска

Содержание IMPRESSA J9.4 One Touch TFT

Отзывы:

Похожие инструкции для IMPRESSA J9.4 One Touch TFT

Бренды по названию

Популярные бренды

Jura IMPRESSA J9.4 One Touch TFT, Инструкция по эксплуатации

Результаты поиска

Содержание IMPRESSA J9.4 One Touch TFT

Отзывы:

Похожие инструкции для IMPRESSA J9.4 One Touch TFT

Бренды по названию

Популярные бренды