Jura IMPRESSA J9.4 One Touch TFT Скачать руководство пользователя страница 39

Страница: 39 / 52

5 Maintenance

Precondition:

‘Decalcify machine’

is displayed. The

symbol is also

displayed.

Press the P button.

‘Maintenance status (1/6)’

Press the

‘Descale’

button.

‘Descale’

If you do not want to start descaling just yet, press the

‘

’

button.

Press the

‘Next’

button.

‘Empty drip tray’

Empty the drip tray and coffee grounds container and put

them back into the machine.

‘Pour descaling agent into water tank’

Remove and empty the water tank.

Completely dissolve 3 JURA descaling tablets in a receptacle

holding 500 ml of water. This may take several minutes.

Pour the solution into the empty water tank and insert it into

the machine.

‘Please press the Rotary Switch.’

Remove the cappuccino frother.

Place a receptacle under the connector of the cappuccino

frother and another under the hot-water nozzle.

Press the Rotary Switch.

‘Machine is being descaled.’

, water flows repeatedly out of

the connector of the cappuccino frother and the hot-water
nozzle.
The operation is interrupted,

‘Empty drip tray’

Empty both receptacles.

Empty the drip tray and coffee grounds container and put

them back into the machine.

‘Fill water tank’

Remove the water tank and rinse it thoroughly.

Fill the water tank with fresh, cold water and reinsert the

tank.

‘Please press the Rotary Switch.’

Refit the cappuccino frother.

Содержание IMPRESSA J9.4 One Touch TFT





















































Результаты поиска

Содержание IMPRESSA J9.4 One Touch TFT

Отзывы:

Похожие инструкции для IMPRESSA J9.4 One Touch TFT

Бренды по названию

Популярные бренды

Jura IMPRESSA J9.4 One Touch TFT, Инструкция по эксплуатации

Результаты поиска

Содержание IMPRESSA J9.4 One Touch TFT

Отзывы:

Похожие инструкции для IMPRESSA J9.4 One Touch TFT

Бренды по названию

Популярные бренды