Jura IMPRESSA J9.4 One Touch TFT, Инструкция по эксплуатации

Страница: 20 / 52

20
2 Preparation
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
If you adjust the consistency of grind when the grinder is not oper-
ating, the grinder adjustment switch could be damaged.
T
Only adjust the consistency of grind when the grinder is run-
ning.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind
during the preparation of an espresso.
T
Open the storage compartment cover.
T
Place a cup under the coffee spout.
T
Press the ‘Espresso’ button.
The grinder starts up. ‘Espresso’ is displayed.
T
Turn the grinder adjustment switch to the desired position
while
the grinder is running.
The espresso is prepared and the consistency of grind is
adjusted.
T
Close the storage compartment cover.
The following temperatures can be selected for preparing hot water:
‘Low’ , ‘Normal’ , ‘X high’ .
There is a danger of scalding from hot water splashes.
T
Avoid direct contact with the skin.
T
Place a cup under the hot-water nozzle.
T
Press the ‘Hot water’ button.
‘Hot water’ and the temperature are displayed.
E
By pressing the ‘ < ’ or ‘ > ’ button several times
(within
approximately 2 seconds)
you can set the temperature to
your individual preference. This setting is not saved.
‘Hot water’ , hot water flows into the cup. Preparation stops
automatically. ‘Please select product:’ appears on the dis-
play.
Adjusting the grinder
CAUTION
Hot water
J
CAUTION